The main function of nboot is as follows: main { SetupCopySection(pTOC); MMU_EnableICache(); Port_Init(); Uart_Init(); NF_Init(); Jump to execute the eboot code} (#define LOAD_ADDRESS_PHYSICAL 0x30038...
1 . IEEE Signal Processing Magazine (IF : 2.655)6 issues a year . In the context of generally low impact factors for magazines in the field of signal processing, having such an impact factor is enough...
Cleaning and maintaining the soldering iron tip
Most electronic soldering users usually do not pay much attention to the maintenance of the soldering iron tip . In fact, the soldering iron is a necess...
I'm working on a power supply circuit. I used LM2575-ADJ to make a 24V to 15V circuit, connected it according to the datasheet, and connected an LM317 circuit at the output to output 10V. I used an os...
Thanks to the enthusiastic netizens for their support of the ADI Reference Circuit section. We will regularly organize the good posts posted sincerely to facilitate those friends who need to learn and...
This electronic clock is controlled by PIC16C55 single-chip microcomputer, which is suitable for timing constant temperature of greenhouse or timing constant pressure control of tap water. The working...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
At very low temperatures, certain metals and alloys lose their resistance to electric
current
and become
superconductors
. Two parameters that are often measured are the transition ...[Details]
Problems such as the depletion of natural resources, air pollution, traffic congestion, and rising fossil fuel prices have forced societies and individuals to seek alternative means of transportati...[Details]
In today's body control module (BCM) designs, savvy engineers are moving away from electromechanical relays whenever possible. Their next step is to eliminate fuses. But is eliminating fuses a nece...[Details]
Motors, especially those with brushes, generate a lot of noise. This noise must be dealt with if the appliance is to meet the requirements of EMC standards. The means to solve EMC are nothing more ...[Details]
According to the Industrial Technology Research Institute of Taiwan, due to factors such as the oil crisis and global warming, the issues of energy conservation and environmental protection have at...[Details]
Abstract: The output of high-range acceleration sensor is less than 10 mV under the excitation of small signal. The noise of traditional test system may cover such small voltage signal, so that hig...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
introduction
Incandescent bulbs can emit a variety of light, but in specific applications, only green, red, and yellow light are usually needed - such as traffic lights. If an incand...[Details]
Currently, each country is developing its own USB interface
charging specifications
, which leads to a major problem that a USB interface
charging
device manufactured in one country...[Details]