This specification establishes the quality standard for heat-shrinkable identification marker sleeves for use in
applications where high temperature performance or where extreme resistance to cleaning solvents is required.
They are also used in space applications where low outgassing is critical. These special requirements are
detailed in Table 5.
The operating temperature for this product is -55° to +225° (-67 to +437°
C
C
F).
This system is a computerised method of identifying items by printing a mark on HT-SCE and HT-CT product
ranges which is permanent upon printing. This system is not recommended where strain relief properties are
required.
The marker sleeves shall be fabricated from cross linked polymer tubing. Supplied flattened and spooled in a
continuous tube as HT-CT or mounted on a carrier as HT-SCE. All sizes have a 2:1 shrink ratio except size
3/32 which has a 3:1 shrink ratio (refer to Table 1 for more details).
The marker system comprises specific printers and ribbons; refer to TE Connectivity (TE) document 411-
121005 ‘TE Identification Printer Product Ribbon Matrix’. Compliance to this specification can only be
guaranteed if TE Connectivity approved printers and ribbons are used. All ribbons used must have an expiry
date which exceeds the testing period. Products printed with white or silver ribbons may not fully comply with
this specification when exposed to some aggressive fluids as detailed in
Table 4
(Page 13).
Unless specified, the tube size for qualification testing is 6.4mm.
THIS IS A CLASS 1 DOCUMENT WHICH IS NONCONFIDENTIAL.
The information contained within this document is the property of TE Connectivity. It is supplied in confidence and the
commercial security of the contents must be maintained. It must not be used for any purpose other than that for
which it is supplied nor, may any information contained in it be disclosed to unauthorised persons. It must not be
reproduced in whole or in part without obtaining written permission from TE Connectivity (TE).
While TE has made every reasonable effort to ensure the accuracy of the information in this standard, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at
any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this standard are for reference purposes only and are subject to change without notice. Specifications are subject to change without
notice. Consult TE for the latest dimensions and design specifications.
1.
REVISION HISTORY
For revision history see DM.TEC.
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
I modified the touch screen driver, which resulted in the phenomenon that only the upper half of the screen is displayed, and the lower half of the screen is white; and the resolution of the upper hal...
It is said that voltage followers have high input impedance and low output impedance. I also looked up on the Internet why high input impedance is good: " Assuming that the signal source outputs a fix...
I have two questions for discussion. For the last question, the moderator found the relevant information for me very quickly. Thank you very much~~ I thought the PPT was written incorrectly, and I rea...
I use T0 timing to output two different frequencies, first output a low frequency, and then output a high frequency after a delay. I originally wanted to achieve different output frequencies by changi...
I want to knowif it is illegal to embed the CodeSourcery compiler into software and sell it to customers along with the hardware (the software is considered free)....
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
In early 2002, I started to write a working program for an IC card prepaid electricity meter. The meter used Philips' 8-bit 51-expanded single-chip microcomputer
87LPC764
, and wa...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
Experimental tasks
A DS18B20 is used to form a temperature measurement system. The temperature measurement accuracy reaches 0.1 degrees. The temperature range is between -20 degrees and +50 de...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
In 2012, more than half of the cars in the European, Japanese and American car markets will be equipped with color displays, navigation systems, satellite communications and other in-vehicle infota...[Details]
At present, the traffic congestion in cities is quite serious. According to relevant news reports: In China, the traffic congestion has expanded from megacities such as Beijing, Shanghai, and Guangzho...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
1 Development of LED Film and Television Lighting
1.1 The significance of developing film and television lighting
Lighting power consumption accounts for a large proportion of the total p...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
