Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Features:
•
Choice of mounting configurations
•
Choice of four output configurations
•
.040” (10.160 mm) PCBoard mount (N and T series)
•
12” (304.800 mm) AWG 26 wires (NZ and TZ series)
OPB760N
OPB775TZ
Description:
The
OPB760N, OPB760T, OPB770N
and
OPB770T
series of reflec ve assemblies feature Photologic
®
output. The electrical
output can be specified as either TTL Totem-Pole or TTL Open-Collector, either of which can be supplied with inverter or
buffer output polarity.
OPB760N
and
OPB760T
series devices are designed for PCBoard moun ng and have 0.04” (10 mm) long leads.
OPB760T and OPB770T
series devices are designed for remote moun ng with two moun ng tabs.
OPB770NZ
and
OPB770TZ
series devices have 12” (305 mm) long, UL approved 26 AWG wires.
All devices in this series offer the added stability of a built-in hysteresis amplifier.
Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more
informa on.
Applications:
•
•
•
•
•
•
Non-contact Photologic®
reflective object sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Door sensor
Ordering Information
Part
LED Peak
Sensor
Reflection Distance
Number Wavelength
Photologic®
(Inch) Min / Max
Mounting
OPB760N
Totem-Pole
OPB761N
Open Collector
OPB762N
Inv-Totem-Pole
PCBoard .40”
OPB763N
Inv-Open Collector
(10.160 mm)
OPB760T
Totem-Pole
leads)
OPB761T
Open Collector
OPB762T
Inv-Totem-Pole
OPB763T
Inv-Open Collector
890 nm
0.080" / 0.220”
OPB770NZ
Totem-Pole
OPB771NZ
Open Collector
OPB772NZ
Inv-Totem-Pole
OPB773NZ
Inv-Open Collector
12” (304.800 mm)
26 AWG wire
OPB770TZ
Totem-Pole
OPB771TZ
Open Collector
OPB772TZ
Inv-Totem-Pole
OPB773TZ
Inv-Open Collector
RoHS
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C
05/2016
Page 1
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
OPB760, OPB770 Buffered Totem-Pole
V
CC
OPB761, OPB771 Buffered Open Collector
V
CC
OUT
OUT
GND
GND
OPB762, OPB772 Inverted Totem-Pole
V
CC
OPB763, OPB773 Inverted Open-Collector
V
CC
OUT
OUT
GND
GND
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C
05/2016
Page 2
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
OPB760 (N and T Series)
OPB770 (NZ and TZ Series)
X = 0.08” [2.0mm] to 0.22” [5.6mm]
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
Pin #
1
2
Description
Cathode
Anode
Pin#
3
4
5
Description
Ground
Output
V
CC
Color/Pin#
Red-4
Black-5
Description
Anode
Cathode
Color/Pin#
White-1
Blue-2
Green-3
Description
V
CC
Output
Ground
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C
05/2016
Page 3
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
Absolute Maximum Ratings
(T
A
=25°C unless otherwise noted)
Supply Voltage, V
CC
(not to exceed 3 seconds)
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature (1/16” inch (1.6 mm) from case for 5 seconds with soldering iron)
(1)
Input Diode Power Dissipation
(2)
Output Photologic® Power Dissipation
(3)
Total Device Power Dissipation
(4)
Voltage at Output Lead (Open Collector Output)
Diode Forward DC Current
Diode Reverse DC Voltage
10 V
-40° C to +85° C
-40° C to +70° C
260° C
100 mW
200 mW
300 mW
35 V
40 mA
3V
Electrical Characteristics
(T
A
= 25°C unless otherwise noted)
SYMBOL
Input Diode
V
F
I
R
Forward Voltage
Reverse Current
-
-
-
-
1.8
100
V
μA
I
F
= 40 mA, T
A
= 25° C
V
R
= 2.0 V, T
A
= 25° C
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Output Photologic® Sensor
V
CC
Operating DC Supply Voltage
Low Level Supply Current:
Buffered Totem-Pole Output
(5)(6)
Buffered Open-Collector Output
(5)(6)
Inverted Totem-Pole Output
(5)
Inverted Open-Collector Output
(5)
High Level Supply Current:
Buffered Totem-Pole Output
(5)(6)
Buffered Open-Collector Output
(5)
Inverted Totem-Pole Output
(5)(6)
Inverted Open-Collector Output
(5)(6)
I
OH
Notes:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
High Level Output Current:
Buffered Open-Collector Output
Inverted Open-Collector Output
4.75
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
5.25
10
10
10
10
10
10
10
10
100
100
100
V
mA
mA
mA
mA
mA
mA
mA
mA
μA
μA
μA
Vcc = 5.25 V, If = 0 mA (output open)
I
CCL
Vcc = 5.25 V, If = 25 mA (output open)
I
CCH
Vcc = 5.25 V, If = 25 mA (output open)
Vcc = 5.25 V, If = 0 mA (output open)
Vcc = 4.5 V, If = 25 mA, V
OH
= 30 V, T
A
=25°C
Vcc = 4.5 V, If = 0 mA, V
OH
= 30 V, T
A
= 25°C
RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
Derate linearly 2.22 mW/°C above 25° C.
Derate linearly 4.44 mW/°C above 25° C.
Derate linearly 6.66 mW/°C above 25° C.Normal application would be with light source blocked, simulated by I
F
=0 mA.
Tested at d = 0.080” (mm) from a 90% diffuse white test surface.
Normal application would be with light source blocked, simulated by I
F
= 0 mA.
All parameters tested using pulse technique.
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C
05/2016
Page 4
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
Electrical Characteristics
(T
A
= 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Output Photologic® Sensor (continued)
I
F(+)
I
F(+)
/I
F(-)
I
OS
LED Positive-Going Threshold Current
(2)
Hysteresis
(2)
Short Circuit Output Current:
Buffered Totem-Pole Output
(1)
Inverted Totem-Pole Output
(1)
Low Level Output Voltage:
Buffered Totem-Pole Output
(1)(4)
Buffered Open-Collector Output
(1)(4)
Inverted Totem-Pole Output
Inverted Open-Collector Output
(1)(4)
High Level Output Voltage:
Buffered Totem-Pole Output
(1)
V
OH
Inverted Totem-Pole Output
(1)(4)
Inverted Totem-Pole Output
(3)
Inverted Open-Collector Output
(3)
-
1.1
-15
-15
-
-
-
-
2.4
2.4
2.4
2.4
-
-
-
-
-
-
-
-
-
-
-
-
25
2.0
-100
-100
0.4
0.4
0.4
0.4
-
-
-
-
mA
-
mA
mA
V
V
V
V
V
V
V
V
Vcc = 5 V, T
A
= 25° C
Vcc = 5 V
If = 25 mA, Vcc = 5.25 V, Output = GRD
If = 0 mA, Vcc = 5.25 V, Output = GRD
V
CC
= 4.5 V, I
OL
= 12.8 mA, I
F
= 0 mA or I
F
=
30 mA
V
CC
= 4.5 V, I
OL
= 12.8 mA, I
F
= 25 mA
V
CC
= 4.5 V, I
OH
= -800 μA, I
F
= 25 mA
V
CC
= 4.5 V, I
OH
= -800 μA, I
F
= 0 mA
V
CC
= 4.5 V, I
OH
= -800 μA, I
F
= 30 mA
V
OL
Notes:
(1) Tested at d = 0.080” (mm) from a 90% diffuse white test surface.
(2) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 90% diffuse white test surface. Reference: Eastman Kodak,
Catalog #E 152 7795.
(3) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 5% diffuse black test surface.
(4) Normal application would be with light source blocked, simulated by I
F
=0 mA.
(5) OPB760N through OPB763N series devices are terminated with 0.20” (mm) square leads designed for printed PCBoard mounting.
(6) OPB770NZ through OPB773NZ series devices are terminated with 12 inches (mm) of 7-strand 26 AWG UL1429 insulated wire on
each terminal. A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire
harnesses.
(7) OPB760T through OPB763T series devices are terminated with 0.020” (mm) square leads designed for printed PCBoard
mounting.
(8) OPB770TZ through OPB773TZ series are terminated with 12” (mm) of 7-strand 26 AWG UL1429 insulated wire on each terminal.
A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses.
(9) All parameters tested using pulse technique.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C
05/2016
Page 5
ST - Low Power RF
京公网安备 11010802033920号
EEWORLD
