After arriving at the company today, I took the time to take out the board and power it on for testing. 1. Set the jumper cap according to the quick start manual. 2. Plug in VGA. 3. Power on and start
Abstract: This design uses Bluetooth wireless transmission technology to realize the communication between the traffic volume data collector and the host computer. Using wireless transmission instead
The NAND FLASH of the FL2440 development board is attached to the NAND FLASH CONTROLLER and used as a peripheral. So direct addressing is not possible. The problem is that the FL2440 only has this K9F
[i=s] This post was last edited by CCS-EBOARD on 2016-3-25 11:02 [/i] I want to use F28027 to control BLDC. How should I process the three-phase Hall signal? Does ECAP have only one pin? Do I use the
I would like to ask you why the two lights of the ez430-rf2500 ed are still not flashing when it is connected to the battery. The red light of the ap is flashing. And there is only one ap temperature
I have been engaged in the development and application of single-chip microcomputers for a long time and have accumulated a certain amount of experience. I have integrated my life-long research experi