[i=s]This post was last edited by yhyworld on 2019-11-20 16:38[/i]See Figure 1,LM5118 specification, 8.2.1 Design Requirements, minimum load current (CCM operation) = 600mA.
Figure 2 is Figure 19 ment
I made a new board, STC12C5A60S2. I can download programs, change the I/O port level, and even test a square wave with delay. But I can't use timer 1 to do PWM output. 1. I can output PWM on the old b
What method can be used to prevent the wind blown out by the fan from dispersing? How to deal with the shaking of the wind plate? Can an expert share some ideas?
[i=s]This post was last edited by btty038 on 2018-11-30 13:37[/i] The above test effect diagram, with further + high voltage frequency,... [b][color=#5E7384]This content is originally created by EEWOR
I bought an AD9854 on Taobao for over 70 dollars. I soldered it on, but found that the clock frequency cannot be multiplied to more than 200M. There is also a serious problem, that is, the I-channel D