The manual says LCD_PWR is the backlight control signal. According to the STN/TFT spec: LCD_PWREN output signal enable/disable. 0 = Disable PWREN signal 1 = Enable PWREN signal. So should I set the PW
Everyone, I use wince4.2+s3c2440 and use large page FLash. After burning some NK, the system startup stops in the SchedInit function under Private. I don’t know the reason?
{:1_123:}[font=微软雅黑][size=4] TI DLP Technology Industrial Application and Innovation Video - In-depth introduction to DLP industrial applications, interpretation of DLP innovation, please watch! [/siz
How is the dead time of STM32 timer 1 calculated? TIM1_BDTR.
The dead zone is described on page 249 of the STM32F10XX data sheet as follows.
UTG[7:0]: Dead-time generator setup Bits 7:0 These bits def
Hello, I'm developing PCI BIOS recently. There is no problem with the basic functions, but I can't return to the motherboard BIOS that called it after executing PCI BIOS. I checked some information, b
I have successfully transplanted the routines for reading and writing FATFS on LPC1114. The reading and writing functions can be realized, but when reading and writing for a long time (almost half a d