Is the instruction MRC p15,0,R1,c0,c0,0 used to read the ID number of the ARM CPU into the ARM register R1? If so, I have now embedded a .s file with the following assembly content in the EVC environm
Wireless sensor network and radio frequency identification technology RFID : https://training.eeworld.com.cn/course/4832The course covers the following contents: introduction, transmission fundamental
I am using a Samsung 2440 connected to an ov2640 camera. When the image is displayed on the LCD, it shakes left and right, and after saving the image, it becomes misaligned. I would like to know where
I want to use the send interrupt to continuously send out the data in a buffer array. I can use the query to achieve it, but after changing to the interrupt, I found that only the first byte 0XFF was
In many IoT devices that rely on battery power, such as smart meters, personal wearable devices, home medical care, smart homes, remote measurement and control , and wireless sensors , device enduranc
(1) Establishment(2)Analytical proceduresCCTL0 = CCIE;// Enable interrupt ( TACCR0 )TACTL = TASSEL_2 + MC_1;// Clock source selected as SMCLK auxiliary clockFrom the above, we can see that the clock s
Embedded System
京公网安备 11010802033920号
