I debugged a Wheatstone stepper motor. I debugged an Okoda 42 stepper motor. I thought the two motors were similar and the drivers were the same, but I found that they couldn't move at all. I searched
Because I usually use CAN bus a lot, I took the time to try out the CAN function of lm3s8962 . The attachment is the program I used for the simple trial. (Receive CAN data of the specified ID and outp
[i=s] This post was last edited by paulhyde on 2014-9-15 03:17 [/i] Is there anyone who can provide the pcb of the intelligent tracking car drive circuit:lol The core board chip is pc9s12xs128 and the
RT. I created a dialog project with vc6.0. When I added the MSComm control, the above prompt appeared and the control could not be inserted. How can I solve this problem?
Function implementation: I use the serial port to receive a string of data from the PC and then send the data in the array to the serial port to transmit it to the PC. Problem encountered: the serial