[font="][size=11.0pt]Almost every embedded device has a debugging serial port. In some scenarios, it is inconvenient to connect to the PC with a physical cable, and a wireless connection is required.
We have a WinCE platform with Hive registry. Customers use the installation package to install software on the platform. During the installation process, the registry will be written, the relevant fil
I have embedded LINUX and use a four-wire resistive touch screen. Now I have a problem. When I use the test program to read the value, the data of a certain area in the upper left corner of the touch
When using standby mode, the current is: 4uA (there are other backup clocks)When using stop mode (lower power), the current is: 118uA (there are other backup clocks)All the above modes use RTC.Accordi
[i=s]This post was last edited by pbabca on 2015-5-7 16:59[/i] The program is to output a clock signal at CLKin, but the simulation found that the signal is all red lines. Assigning initial values, in