[i=s]This post was last edited by RISC-Vduino on 2022-6-25 09:35[/i]This article is a hands-on practice of getting started with zero foundation. If you get the board for the first time and want to dev
I modified the original ADI example and was able to see the ADC value. But I'm not sure if it's real. I'm using my own programming method now. The voltage level connected to the ADC pin is the voltage
[i=s]This post was last edited by paulhyde on 2014-9-15 09:02[/i]0.5 degree temperature change, digital display.
2 ohm power resistor heats up, the resistor is well insulated and placed in a high
45 d
It is generally said that the 2nd and 3rd layers are for ground and power, but how can I draw the ground on the 2nd layer and the power on the 3rd layer? How should it be drawn? Is it just like laying
I'm writing a program for an SD card recently. The interface I use is SPI. The card I'm testing is a 4G Kingston high-speed card. I've run into a problem. After initialization, I send CMD58 to read th