Let's take action!!! After the novice registers: 1. Set up a section similar to the "water version" specifically for advertising users to flood the forum (formulate corresponding rules, and those who
Complete introduction of 12V power supply with voltage meter, terminal and emergency stop button :https://www.hackster.io/DerPandaHammer/power-in-a-box-f16849
[color=#444444][font=Tahoma,]The cputimer program provided by the board has a problem. I hope you can help me with it. When the DSP is single-step debugged, the value of the register CLKMD does not ch
[align=left][Repost]Today, robots have penetrated into every aspect of our lives, from companion robots that can take care of the elderly to robot vacuum cleaners, and even health robot consultants li
Use STC8G1K08 I2C bus to control RDA5807M to achieve high-fidelity reception of FM signals. The frequency is displayed by a 0.36- inch common-anode LED digital tube. The 8G1K08 will not interfere with
I am learning microcontrollers. The book says: The operand after push can only be a direct addressing method, such as: push 30H push ACC. It also says: push A is wrong, that is, the operand cannot be