A magnetic sensor array consisting of 10 LIS2MDLs is used, with each sensor spaced 25mm apart and a total board length of 250mm*20mm, to detect the position of magnetic nails.
The main control uses ST
In STM, when the VDD power is disconnected, the intrusion detection function is still valid. Why does the backup register not get cleared when I change the level when the VDD power is off?
I am a newbie from 51/avr. I have been looking at the stm32 firmware library for a few days and I am not used to it. It is not easy to get familiar with the huge firmware library. So I want to return
IAR development environment, MAKE project and click download project all have the same effect, they are all compiled, I am depressed, I don't know why? Experts please give me some advice
How to add common-mode filtering to the DC-DC output? The TPS23754 design is used. The 48V to 5V conversion test exceeds the standard. I want to add a common-mode filter at the back end, but the induc
After getting the Atmel ATmega256RFR2 Xplained Pro, the first thing to do is to turn it on. For details, see below: First open Atmel Studio 6 and create a new project, as follows: http://www.eeboard.c