Training

Location:Training / Embedded Development / System Design / Embedded System Design / "Embedded System Design" 10-Common embedded hardware (production from typical ARM system to Boot ROM)

You can log in to your eeworld account to continue watching：
"Embedded System Design" 10-Common embedded hardware (production from typical ARM system to Boot ROM)
Login

Chapter 1："Embedded System Design" 1-Explanation and Embedded Systems and Desktop Systems (to Processor Technology)
Chapter 2："Embedded System Design" 2-Embedded systems and desktop systems (processor technology to I2C)
Chapter 3："Embedded System Design" 3-Embedded Systems and Desktop Systems
Chapter 4："Embedded System Design" 4-Introduction to embedded systems (embedded systems are defined to Hunter ICC irrigation controller)
Chapter 5："Embedded System Design" 5-Introduction to embedded systems (Hunter ICC irrigation controller to embedded real-time system classification)
Chapter 6："Embedded System Design" 6-Assignment 1 and Introduction to Embedded Systems (Embedded Real-time System Classification to the End)
Chapter 7："Embedded System Design" 7-Introduction to the software part of embedded systems (embedded system software characteristics to development history)
Chapter 8："Embedded System Design" 8-Introduction to the software part of embedded systems (relying on the development of related technologies to the code critical value)
Chapter 9："Embedded System Design" 9-Common embedded hardware (starting with the ARM family)
Chapter 10："Embedded System Design" 10-Common embedded hardware (production from typical ARM system to Boot ROM)
Chapter 11："Embedded System Design" 11-Common embedded hardware (other hardware to the end) and system-level design methods (starting to computer design)
Chapter 12："Embedded System Design" 12-System-level design method (computer design to system resource arrangement)
Chapter 13："Embedded System Design" 13-Software and hardware co-design (starting to typical co-design process)
Chapter 14："Embedded System Design" 14-Software and hardware co-design technology (software and hardware co-design content to division) and software and hardware system division technology (start to system division)
Chapter 15："Embedded System Design" 14-1-Division and assignment of tasks
Chapter 16："Embedded System Design" 15-Embedded System Design U-BOOT (Some introduction to Bootloader)
Chapter 17："Embedded System Design" 17-Embedded System Design U-BOOT (jump to the C entry point of stage2 to the embedded system Bootloader)
Chapter 18："Embedded System Design" 18-Embedded System Design U-BOOT (LILO to connection script file)
Chapter 19："Embedded System Design" 19-Linux Embedded System Design (Starting with Linux Bootloader)
Chapter 20："Embedded System Design" 20-Linux Embedded System Design (the first step in the Linux startup process to DeBug symbol reduction)
Chapter 21："Embedded System Design" 21-Linux embedded system design (Linux driver design) and MP3 player design (development tool selection)
Chapter 22："Embedded System Design" 22-MP3 player design (design method to block device reading)
Chapter 23："Embedded System Design" 23-MP3 player design (adding new device Ramdisk to Uboot to the end) and network storage design (start to end) and some supplementary instructions

Duration：49 minutes and 15 seconds
Date：2014/01/01

Uploader：EE资深网友

Introduction

keywords： Embedded

Produced by Shanghai Jiao Tong University. Although the teaching style is a bit casual, it can be seen that he is a teacher with considerable practical experience and has given many practical and practical design solutions and experience guidance, especially the introduction of MP3 playback. The design of the device, I believe everyone will be eager to try it after seeing it!

You Might Like

Recommended Posts

Please recommend a low power consumption timing chip... Thank you~: Can any expert give me some advice? I need a timer chip that will send an interrupt signal to my microcontroller every 10 minutes. It would be best if it has super low power consumption.; ufozhao202 Analog electronics

Goodbye, netbook!: [i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:04[/i][p=null, 2, left][font=微软雅黑][size=3][color=#b00500]Goodbye! Netbooks! [/color][/size][/font][/p] [p=null, 2, left][font=微软雅黑][siz; wstt Mobile and portable

How to convert high and low level signals into analog signals: Please teach me how to convert high and low level signals into corresponding output analog voltage signals. The reference voltage is 2.5V, the high level is above 2.5V, and the low level is above 2.5V; WF20142826 Analog electronics

g2553 read and write sd card: I beg you to know how to use g2553 to read and write sd cards. The main reason is to store the AD converted value into the sd card!! The ad conversion frequency is 230hz and the sd card used is 4g. I; s87402 Microcontroller MCU

Button reset: How do I connect the reset button on the MSP430 system board? Is there a schematic diagram?; lovetree Microcontroller MCU

MSP430 Study Notes 6- Dynamic Digital Tube Display: [color=#000][font=Arial]I rewrote the main part of this program. The program uses the watchdog as a normal timer and scans the digital tube in the watchdog interrupt. In addition, I added a display bu; qinkaiabc Microcontroller MCU

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号