I drew a minimum system board some time ago, without copper cladding. After the board was soldered, there were no problems during use. This is the second board. Because there are analog circuits and d
The MSP430 microcontroller has a basic timer (Basic Timer1), which is often used in low power consumption. Its purpose is to support software and various peripheral modules to work under low frequency
#include"msp430g2553.h"//P1.2输出unsigned int m=0,qushu=0,k=0,max=0,min=255;void delay(unsigned int i)
{unsigned int j;for(j=0;jqushu)min=qushu;m=1;P1OUT ^= 0x40;__bic_SR_register_on_exit(CPUOFF);// Cle
I would like to ask, in a circuit powered by a 10V DC voltage source, there are one 4uF and one 6uF 1 ohm resistor connected in series. How do you calculate the voltage across the two capacitors when