Training

Location:Training / Embedded Development / Embedded operating system / Wei Dongshan Linux Graduation Class / Graduation Class Lesson 4 Section 1_Transplanting the driver to the 3.4.2 kernel DM9000C

You can log in to your eeworld account to continue watching：
Graduation Class Lesson 4 Section 1_Transplanting the driver to the 3.4.2 kernel DM9000C
Login

Chapter 1：Graduation Class Lesson 1, Section 1.1_The first stage of writing your own bootloader
Chapter 2：Graduation Class Lesson 1 Section 1.2_Writing your own bootloader - Stage 2
Chapter 3：Graduation Class Lesson 1 Section 2_Compilation Test of Writing Your Own Bootloader
Chapter 4：Graduation Class Lesson 1 Section 3_Improvement of writing your own bootloader
Chapter 5：Graduation Class Lesson 2 Section 1_First try of transplanting the latest u-boot
Chapter 6：Graduation Class Lesson 2 Section 2.1_Overview of the analysis and startup process of transplanting the latest u-boot
Chapter 7：Graduation Class Lesson 2, Section 2.2_Analysis of the Memory Distribution of the Startup Process of Transplanting the Latest U-boot
Chapter 8：Graduation Class Lesson 2, Section 2.3_Analysis of the startup process of transplanting the latest u-boot and relocation
Chapter 9：Graduation Class Lesson 2 Section 3.1_Modify the latest u-boot code and build a new board_Clock_SDRAM_UART
Chapter 10：Graduation Class Lesson 2 Section 3.2_Modify the latest u-boot code to support NAND boot
Chapter 11：Graduation Class Lesson 2 Section 3.3_Modify the latest u-boot code to support NorFlash
Chapter 12：Graduation Class Lesson 2 Section 3.4_Modify the latest u-boot code to support NandFlash
Chapter 13：Graduation Class Lesson 2 Section 3.5_Modify the latest u-boot code to support DM9000 network card
Chapter 14：Graduation Class Lesson 2 Section 4.1_Cut and modify default parameters of transplanting the latest u-boot
Chapter 15：Graduation Class Lesson 2 Section 4.2_Porting the latest u-boot supports burning yaffs image and making patches
Chapter 16：Graduation Class Lesson 3 Section 1_Framework Introduction and Simple Modifications for Porting 3.4.2 Kernel
Chapter 17：Graduation Class Lesson 3, Section 2_Modify the partition and create the root file system for transplanting the 3.4.2 kernel
Chapter 18：Graduation Class Lesson 3 Section 3_Porting the 3.4.2 kernel to support the yaffs file system
Chapter 19：Graduation Class Lesson 3 Section 4_Introduction to cropping and ECC of porting 3.4.2 kernel and making patches
Chapter 20：Graduation Class Lesson 4 Section 1_Transplanting the driver to the 3.4.2 kernel DM9000C
Chapter 21：Graduation Class Lesson 4 Section 2_Transplanting the driver to the 3.4.2 kernel LED and buttons
Chapter 22：Graduation Class Lesson 4 Section 3_Transplanting the driver to the LCD and input system of the 3.4.2 kernel
Chapter 23：Graduation Class Lesson 4 Section 4_Transplanting the driver to the 3.4.2 kernel block device and virtual network card

Duration：57 minutes and 4 seconds
Date：2014/01/01

Uploader：EE资深网友

Introduction

keywords： Linux Embedded

Speaker: Wei Dongshan, male, graduated from the University of Science and Technology of China majoring in electronics. He once worked for ZTE. Now he founded 100ask Baiwen Technology Company, dedicated to providing one-stop embedded learning solutions of "textbooks, forums, development boards, and emulators" plan.

You Might Like

Recommended Posts

DIY a No. 7 battery to light up a super bright LED for emergency use in power outages: 1. Circuit Schematic Preparation The voltage of a nickel-metal hydride battery is only 1.2V, while the ultra-bright LED requires a working voltage of more than 3.3V to ensure sufficient brightness. Th; qwqwqw2088 DIY/Open Source Hardware

Please tell me the definition of uint16: In the following definitionstruct HISPCP_BITS { // bits descriptionUint16 HSPCLK:3; // 2:0 Rate relative to SYSCLKOUTUint16 rsvd1:13; // 15:3 reserved};Why is there a colon in HSPCLK:3 after the uint1; 2002xiao DSP and ARM Processors

The story of DSP and parallel DA...: How should DSP be connected to parallel DA to output the processed data? The DSP of 5509A uses 8-bit parallel AD at the input end (occupying CE0 space and D0-D7 of DSP data line). How should the data; zhaironghui DSP and ARM Processors

[Routine experience of Flathead RVB2601 development board] Part 1: Download the example program successfully, sharing experience!: 1. Introduction I had just received the board and set up the development environment, but was stuck at the step of downloading the program. I felt that there were some problems when installing the dev; w494143467 XuanTie RISC-V Activity Zone

Transformer knowledge: [U][ip]A transformer is a device that transforms AC voltage, current and impedance. When AC current flows through the primary coil, AC magnetic flux is generated in the iron core (or magnetic core), c; fighting Analog electronics

I encountered an error when compiling PB. Can anyone help me? Thank you!: I am a novice. When I use wince5.0 to compile a new PB, the following error is prompted: making: FATAL ERROR:Cannot open F:\创建文件夹\2222\Reldir\smdk2440a_ARMV4I_Relea\postproc\platform.bib making: FATAL; chokee Embedded System

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号