BabyCareAssistant is a children's toy "black box" based on SensorTile.box. It can be used to dynamically display motion data, real environment data, assist in monitoring children's activities, cries, etc.
Use sensortile.box equipped with high-performance six-axis sensor lsm6dsox to realize gesture remote control.
Few elevator maintenance managers need to manage and maintain a large number of elevators, making it difficult to detect elevator faults in time. Based on ST's SensorTile, the author implements the sensor's automatic detection of elevator arrivals and faults, which can serve as input for possible intelligent control systems, thereby enabling more efficient and convenient elevator use and management.
The design is based on the SensorTile.Box kit, which is set to expert mode for direction change detection (using a gyroscope), close to the practitioner's lower abdomen; the LIS25BA bone conduction sensor collects and identifies the vibration signal of the user's breathing status at the nostrils. The signal output is also connected to the central main control circuit. The optimal compliance judgment for monitoring the breathing process coordination during the entire exercise process and the corresponding voice prompt information broadcast are made by the central main control circuit.
As China's title of "Infrastructure Maniac" becomes widely known, more and more workers are engaged in dangerous jobs, such as high altitude, underground, tunnels, and engineering vehicles. In order to ensure the safety of these construction workers and ensure timely rescue in the event of an accident, I designed this safety black box for engineering personnel. This equipment can collect the heart rate of construction workers, the temperature and humidity of the surrounding environment, identify the state of movement, and determine whether a fall or collision accident has occurred. It is transmitted to the remote monitoring center through the network. Once the monitoring personnel find an abnormality, they can immediately organize rescue.
This TI design combines TI's wireless microcontroller (CC3200) with third-party vendor DLP Design's TRF7970 NFC BoosterPack to simulate a near field communication (NFC) card reader that scans from an NFC card to of data is transmitted securely and in real time over Wi-Fi networks to any remote location or database. Disclaimer: DLP Design, Inc. is not affiliated in any way with DLP® products from Texas Instruments Incorporated.
The PMP40069 reference design is for portable DLP Pico projectors. It also comes with a 3-cell battery charger. The battery powers the projector when the adapter is unavailable. This solution implements the DLPA3000 PMIC/LED driver, DLPC3438 display controller and SMBus battery buck/boost charge controller BQ25700A. DLPA3000 PMIC is a fully integrated dedicated PMIC/LED driver that meets various system analog power requirements and can drive 0 ~ 6A RGB LEDs. The buck/boost charger is compatible with 5/9/12/15/20V output adapters. The charger is highly efficient and can provide 3A charging current for 3 batteries.
This reference design includes an analog Hall sensor and op amp circuit that can be used for position or angle sensing, with the advantages of no contact and wear, high stability, and a wide sensing range. This design analyzes two configurations of magnets and Hall sensors. This design provides adjustable offset and system gain along with op amp circuitry to achieve the desired output offset and range.
The TIDA-00912 TI reference design provides a complete isolated current measurement reference solution using an external shunt, reinforced isolation amplifier, and isolated power supply. Parallel voltage is limited to 25mV. This reduces power dissipation in parallel connection, enabling high current measurement ranges up to 200A. The shunt voltage is amplified by an instrumentation amplifier configuration with a gain of 10 to match the isolation amplifier input range for better signal-to-noise ratio. The output of the isolation amplifier is level shifted and adjusted to match the full input range of the 3.3V ADC. This design uses a free-running transformer driver operating at 410kHz to generate an isolated supply voltage in a small form factor to power the high-voltage side of the circuit.
TIDA-01234 is a 24W high efficiency (94%) low-cost asynchronous boost reference design for automotive LED applications based on LM3481-Q1.
This reference design is suitable for automotive high-intensity lighting systems such as headlights and taillights, as well as interior LED lighting systems. It is designed to operate over an input voltage range of 6V to 18V and is capable of driving multiple strings of 6 to 7 LEDs in series (16V to 24V) at a constant current of 1A. This reference design supports analog LED brightness control and output open circuit protection. In a boost-to-battery configuration, the input voltage can be above, below, or equal to the desired LED string voltage.
TI Design TIDEP-0091 highlights strategies for power optimization of IWR14xx 76- to 81-GHz mmWave sensors in tank level-probing applications, displacement sensors, 4- to 20-mA sensors, and other low-power applications for detecting range with high accuracy in a minimal power envelope. In these applications, the system often operates on a low-voltage data line that provides less power than the operational power consumption. Duty cycling is critical to reducing the average power to meet the power input restrictions. Power optimization is achieved through MSP432 external duty cycling the IWR14xx device for periodic sensing. Additionally, this TI Design provides a sample configuration for single-dimensional range detection.Read more about fluid-level sensing using 77-GHz millimeter wave (SPYY004).Watch the introduction to level sensing (video).
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
