Introduction: Use 9018 transistor to transmit NFM FM broadcast. It has few components and is simple and suitable for beginners.
Introduction: Logitech G613 complete circuit schematic diagram. If you have any questions, please join the group 493805900
Introduction: Minimal system board based on Infineon tc264s
Introduction: 4*4 custom mechanical keyboard based on 51 microcontroller
Introduction: 2017 Electronic Competition H Topic Solution: Amplitude-frequency characteristic detection and remote transmission are completed through four parts: signal generator module (DDS), program-controlled amplifier module (VGA), detector module, and remote signal transmission module; the display adopts LCD12864 display Screen
Introduction: SSTC+PLLSSTC dual TC combined board. In the video, the power bridge and driver are powered by 12V. Because the power bridge and driver are isolated by GDT, the power bridge can accept rectified and filtered mains power.
Introduction: Dual E Class Tesla Coil
Introduction: The smoke coming out from under the coil in the video is caused by freewheeling electric cold. Originally, an air-core inductor was supposed to be used, but instead a magnetic ring was used. Key parameters: resonant capacitor 590PF, freewheeling inductance value 0.34UH, secondary coil inductance value 1.147UH
Introduction: The pin definitions are the same as the official board circuit, but the layout is slightly different.
Introduction: The famous 555 chip is made of transistor, resistor and 2 diodes. Please download the BOM table in the attachment.
Introduction: The esp32-wroom-32D core board is produced according to official documents. The layout of the board has been slightly changed. The download port has been changed to TYPE-C and the serial port chip has been changed to CH340C.
Introduction: Clone from https://oshwhub.com/x444222/g613-ju-zhen
Introduction: Tuya Smart-temperature and humidity sensor integrated Tuya smart curtain wireless remote control
Introduction: Based on the lighting technology platform-ESP8266-01s relay, local physical switch, 433/315MHZ radio frequency remote control (stick the switch at will), AP+ web distribution network
Introduction: Manta R2 remote control modified version V1.0
Introduction: Star Wars remote control to Loli remote control motherboard v1.0
Introduction: 2.4G remote control: remote control via Bluetooth and NRF24L01 with joystick, buttons, and gyroscope.
Introduction: Copied Tesla coil circuit diagram plus own annotations
Introduction: IC lamp bead lamp board with ESP8266 microcontroller