USB-C "switch", hardware open source, firmware provided

The basic functions of USB-C are supported, such as high-speed communication and charging functions. Then this design solves the problem of painless switching between one host and multiple devices, or one device and multiple hosts.

Schematic PCB

Open source USB2.0 high-speed analyzer

The analyzer host computer directly uses Wireshark. The hardware is implemented using Cypress CY7C68013A MCU + Lattice LCMXO2 FPGA + Microchip USB3343 USB PHY

Schematic PCB

WS281x LED RS485 transceiver

2 Layers PCB 10 x 18 mm FR-4, 1 mm, 1, HASL with lead, White Solder Mask, Black silkscreen;Cofigurable RS485 TX-RX transceiver for long range serial LED strip communication

Schematic PCB

WS2813 WLED fixed buffer

2-layer PCB 9 x 11.4 mm FR-4, 1 mm, 1, HASL with leads, blue solder mask, white silkscreen; very small buffer for WS2813 LED strip.

Schematic PCB

Multifunctional buffer for WS2813 LED strip

2 Layers PCB 10 x 16.5 mm FR-4, 1 mm, 1, HASL with lead, White Solder Mask, Black silkscreen; WS2813 buffer and repeater for long range serial transmission

Schematic PCB

W84219ASJ75_lighting detector

2-layer PCB 38.7 x 49.5 mm FR-4, 1.6 mm, 1, with wire spray tin, red solder mask, white silkscreen; lightning detector.

Schematic PCB

Sunmachine-A2 - Intelligent Lighting System

Driver for WS2812, SK6812 or similar LED strips controlled via Bluetooth LE. It supports RGB and WWA LEDs. The drive uses motion and light sensors so in automatic mode it can turn on the lights when it detects the presence of someone in the dark.

Schematic PCB

kicad USB splitter: a three-way USB splitter for personal design and use

A simple USB switch so I can swap a keyboard or mouse between two computers.

It is operated by 4 single mechanical switches, 1 for each channel. Simple designs can be implemented.

Schematic PCB

LEDThermometer: LED Indoor Wall Thermometer with Power Adapter

LED Indoor Wall Thermometer with Power Adapter

Schematic PCB

LEDBOY: A game console without an LCD screen based on Attiny 1614

This project started with a conversation with a friend and apparently how the LED based consoles that existed in the 70's have never been revisited

Schematic PCB

110/220VAC optically isolated zero-crossing detector module for DIN rail bracket mounting with 3.3V or 5V output - ideal for Arduino, ESP32/ESP8266

Detects Zero Cross point of AC supply (110/220VAC) and outputs a 1ms square pulse at 3.3V or 5V. 72mm x 20mm for DIN rail carrier mount.

Schematic PCB

1117 Simple board for voltage regulator

2 Layers PCB 14.8 x 24.8 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen;For SMD 1117 Set Voltage O/P Regs - LED Indication

Schematic PCB

10x10x10 LED cube

The project is a cube shaped 10x10x10 LED matrix controlled by a serial interface.

Schematic PCB

100W fast charging power bank (0.91' OLED screen)

A 100W fast-charging mobile power supply based on the IP5389 chip solution, equipped with an OLED display that can display battery power and temperature.

Schematic PCB

0-30V, 0-7A adjustable switching power supply

2 Layers PCB 42.2 x 68.8 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen;

Schematic PCB

0-30V 0-3A DC regulated power supply circuit

0-30V 0-3A DC regulated power supply circuit

Schematic PCB

0603 LED light strip 7 LEDs

2-layer PCB 8.89 x 19.05 mm FR-4, 0.8 mm, 1, soldered with leads, white solder mask, black silkscreen

Schematic PCB

L3751 DC converter reference solution

STMicroelectronics provides users with a reference design based on L3751, suitable for DC-DC converters with input voltage 36-72V DC, output voltage 12 VDC, and 10A.

Schematic PCB

TPD7106F Single Output High Side N-Channel Power MOSFET Gate Driver IC Applications and Circuits

This reference design provides application circuit and simulation examples of the TPD7106F, whose features include power supply reverse connection, charge pump circuit, etc.

Schematic PCB

1.6kW 48V output telecommunications equipment power supply

This reference design provides design guidance, data and other content for a 1.6kW 48V output power supply using semi-bridgeless PFC and isolated phase-shifted full-bridge DC-DC converters.

Schematic PCB