Introduction: According to @aifairytale’s open source CC2530, the core board has not been modified yet.
Introduction: The car control panel uses ATMEGA 328P master control. The control method uses the NRF24L01P 2.4G communication module to connect to the remote control. It can also be controlled using the E103-W01 module network communication.
Introduction: It is characterized by simplicity and low cost. You can just use the WeChat applet to receive it. No Bluetooth connection is required, but Bluetooth reception needs to be turned on. (This is the first time this application has been launched on the Internet, that’s what I’m saying)
Introduction: A small night light with no special functions, just color changing and adjustable brightness. But it looks like an Android robot (the appearance is unique in the world).
Introduction: The moment S Olin's eyes light up, anyone who does not automatically hear the sound of Unbreakable Alliance in his head will be sent to the Lubyanka
Introduction: AD834 500MHz bandwidth four-quadrant multiplier
Introduction: Ships a new version of nodemcu, at least not found in the open source community
Introduction: Open source testing, the schematic diagram adopts official modifications, please test it with experts, you will be rewarded for testing, contact information: QQ2675653184
Introduction: I think it’s time to go modular. Is there still a situation where SPIflash is not enough? Grab An Xinke’s job www
Introduction: A platform for developing 2.4G wireless remote control systems
Introduction: Improved with reference to Anxinke’s official NodeMCU-32S Lua WiFi IoT development board
Introduction: Today, Essence 8266 for 1 yuan is very good, but many friends may not be able to buy it or are too lazy to draw the board, so I drew this core board that is compatible with esp12f 12s 07s. The resistors and capacitors are compatible with direct plug-in 0805 0603 , no USB
Introduction: Porting jyesmith's documents, all rights belong to the original author, I just ported them
Introduction: This project is a USB wireless decryption dog based on ATMEGA32u4-au and Loli third-generation PPM receiver
Introduction: This project is a solution verification business card based on NXP's NT3H1101W0FHKH nfc chip.
Introduction: A four-axis remote control based on the open source four-axis version of RoboFly.
Introduction: A quadcopter based on RoboFly open source quadcopter
Introduction: The board is ready and the basic functions are normal. The hub tested and slept for five minutes. Several matrices did not trigger. It may be a soldering problem on my part. The Bluetooth blue cannot be turned on. It may also be a soldering problem. Several packages were not selected correctly, the dimensions were wrong, and the soldering failed. All problems will be improved in the next version.