Introduction: Keywords: Youlian K230 wireless master control, 40-key in-line keyboard, lithium battery charging, AutoHotKey, borderless, full-key programmable
Introduction: Keywords: Youlian K230 wireless master control, 40-key in-line keyboard, lithium battery charging, AutoHotKey, borderless, full-key programmable
Introduction: Keywords: Youlian K230 wireless master control, 40% ordinary configuration keyboard, lithium battery charging, AutoHotKey, borderless, full-key programmable
Introduction: The Pineapple 2 series uses LoRa spread spectrum modulation for long-distance wireless communication for the first time, using the SX1278 wireless module. The SX1278 wireless module with LoRa spread spectrum modulation of 433MHz has long-distance communication, high penetration, and anti-interference.
Introduction: The Pineapple 2 receiver still adopts a classic design layout, with 2.54mm-16P pin header*3, red and blue dual LED indicators, frequency binding button, 1.25mm-2P horizontal mounting interface*4, and the wireless module uses a back patch button.
Introduction: Homemade nfc card gift, based on @Shibo's project https://oshwhub.com/Shibo/gong-xun-ji-nian-pai. Switch to CUID or UID chip and add several new styles.
Introduction: Chartered public 4-way Loli receiver ESC
Introduction: Added 5v charging and discharging, the boost module can be directly powered by five volts
Introduction: This project is a simple audio amplifier circuit designed when participating in the school selection.
Introduction: Modify the layout of https://oshwhub.com/death/naze32-kong-xin-bei-si-zhou to adapt to four-axis with various wheelbases, but you need to prepare your own rack and receiver.
Introduction: LoRa module test adapter board
Introduction: Keyboard based on QMK firmware and Logitech K375S main control, the shell is adapted to Kaiku 84
Introduction: Loli Generation’s open source remote control
Introduction: ESP32-S3 development board, all IO leads out, verified, compatible with NOR FLASH, SPRAM and S3 version with built-in FLASH and SPRAM. Use AD to draw, personal non-profit. The board and patch verification has been completed.
Introduction: ESP32-S2 development board, with all IO leads out, has been verified to be compatible with NOR FLASH, SPRAM and the S2 version of built-in FLASH and SPRAM. Use AD to draw, personal non-profit. The board and patch verification has been completed.
Introduction: This is a 150MW image transmission system based on RTC6705 and ERC6659E chips, supporting 30.5mm flying tower installation port
Introduction: As shown in this project, my video transmission version 3.0 has been completed. Currently, there are some problems with power control, so the microcontroller version 4.0 is not open source for the time being.
Introduction: Remote control panel designed based on Hummingbird wireless module
Introduction: Built-in ELRS 2.4G tuner solution suitable for T-lite RC remote control.