The analyzer host computer directly uses Wireshark. The hardware is implemented using Cypress CY7C68013A MCU + Lattice LCMXO2 FPGA + Microchip USB3343 USB PHY
An air purifier based on stm32f103rct6 chip can measure temperature and humidity and control fans.
Chhavi is a tiny, wireless, touch capacitive fingerprint sensor with high-end security features, support for ultra-low power operation and optional NFC connectivity. Its open source firmware is fully compatible with the Arduino IDE. Chhavi is powered by ESP32 and features an FPC BM-Lite fingerprint sensor by Fingerprints, giving you and your projects access to the excellent biometric hardware found in many smartphones. Unlike optical fingerprint sensors that are large and power-hungry, this capacitive biometric sensor is small, accurate, and energy-efficient. During our design process, we determined that NFC communication would be a powerful feature for many of the same applications that might require a high-quality fingerprint sensor, but we could not find a major ESP32-driven NFC controller. So we built one into Chhavi as an optional feature. We've also added an optional battery to simplify installation and facilitate mobile deployment. The result is a tiny device with a cutting-edge fingerprint reader, Wi-Fi and Bluetooth capabilities, as well as support for NFC and battery power when needed.
Software and hardware are all open source
Protues simulation example (8051)-stepper motor
Fully automatic washing machine program and circuit diagram
Well-known maker Rossum shows us how to build an open source set-top box and connect it to an ESP32-based video streaming service.
A lightweight UAV flight control based on STM32F103.
With electronic ink screen, can simulate various IC cards
Joint debugging and listening device solution based on STM32 (schematic diagram, PCB source file, debugging tools, video).
Introducing an application solution for Bluetooth products that is very common in everyone's life, a Bluetooth selfie stick application developed based on the MM32W series.
The processor of the small four-axis machine uses the STM32F103 chip, and the sensor uses the MPU6050
Hardware design is difficult, but Nordic is all open source, and PCB, BOM, Gerber, schematics, etc. are all provided. The schematic is also annotated.
All 12 I/O pins of this design are broken out to 0.1" headers. All 4 TX/RX channels and the reference clock are broken out to SMA connections.
Share license plate recognition control board schematic + 3D PCB