Mouse circuit diagram, PCB and source code based on CY7C63723/CY7C63722 chip

Mouse circuit diagram, PCB and source code based on CY7C63723/CY7C63722 chip

Schematic PCB

DEMOFLEXISJMSD: Flexis JM circuit board with SD card drive and USB data connection

The NXP SD Card Reader (DEMOFLEXISJMSD) reference design allows you to read and write files stored in a SD Card from a PC or USB host-enabled system.

Schematic PCB

OM13071: LPCXpresso824-MAX circuit board for LPC82x series MCUs

LPCXpresso824-MAX circuit board for LPC82x series MCUs

Schematic PCB

FRDM-KE02Z40M: Freedom development platform for Kinetis KE02 MCU

FRDM-KE02Z40M is a simple yet sophisticated development platform for the Kinetis KE02 MCU built on the Arm® Cortex®-M0 ⁺ core ^.

Schematic PCB

Robotic arm program based on arduino

It has been verified that it communicates with the arduino microcontroller through the serial port (USB, Bluetooth, etc.), and then the microcontroller controls the servo on the robotic arm to control the robotic arm to perform responsive movements.

Schematic PCB

FRDM-K28F: NXP for Kinetis ^{® K27 and K28 MCUs}Freedom development board

FRDM-K28F is a low-cost development board for Kinetis K27 and K28 high-performance microcontrollers based on Arm Cortex-M4.

Evaluation board for STM32L073VZ MCU

Evaluation board using STM32L073VZ MCU

Schematic PCB

Bluetooth smart lock solution based on MM32W wireless MCU series

Introducing a Bluetooth application solution with very rich usage scenarios - a Bluetooth smart lock solution developed based on the MM32W series.

S32K142 BLDC/PMSM development board

Schematic PCB

OM40007: LPC54018 IoT module for LPC540xx series MCUs

The LPC54018 IoT module is a high-performance, self-sufficient microcontroller module that supports IEEE802.11 and is suitable for products based on the LPC540xx MCU series.

Schematic PCB

UAV code and documentation based on STM32

The structural characteristic of a quadcopter is that it is equipped with a rotor on each of its four corners, which are driven by motors. The blades can rotate forward or reverse. In order to maintain the stable flight of the aircraft, the quadcopter is equipped with 3-directional gyroscopes and 3-axis acceleration sensors to form an inertial navigation module. It also uses an electronic controller to ensure its fast flight.

Schematic PCB

FPGA-based Ethernet controller (MAC) source code

Schematic PCB

5.5-inch LCD screen

Schematic PCB

ReflowMaster: open source reflow master control based on the magic oven (schematic, PCB, gerber, source code, etc.)

Reflow Master Pro is designed to work in any oven - no algorithm adjustments required! That said, if you really want to tweak, you can switch from the classic Reflow Master algorithm to PID control and adjust your settings to your liking.

Schematic PCB

TWR-56F8200: Tower System Module for MC56F826xx and MC56F827xx

Schematic PCB

OM13085: LPCXpresso board for LPC1769 with CMSIS DAP hardware debugger

LPCXpresso board for LPC1769 with CMSIS DAP hardware debugger

Schematic PCB

Cynthion: Open Source Multi-Function USB2.0 High-Speed ​​Analyzer

Schematic PCB

Industrial digital output expansion board based on IPS161HF, suitable for STM32 Nucleo

Industrial digital output expansion board based on IPS161HF for STM32 Nucleo

Schematic PCB

SPC58 C, E, G and N wire micro socket module in BPC292 package

Embedded small form factor module for SPC58 C, E, G and N series in BGA292 package.

Schematic PCB

2018 Electronic Competition Question D-Gesture Recognition Device (Anhui University)

Schematic PCB