CN0326

Isolated, low-power pH monitor with temperature compensation

Schematic PCB

CN0247

12-bit, 1 MSPS SAR ADC and driver, total power consumption is less than 5 mW

Schematic PCB

CN0273

High-speed FET input instrumentation amplifier with low input bias current and high AC common-mode rejection

Schematic PCB

PNEV512R: EXPLORE-NFC - Exclusively supplied by element14

EXPLORE-NFC - exclusively supplied by element14

pmod-sd-dummy: virtual SD card connected to the host system via SDIO

​This design has a PMOD for the SD card to emulate the SD card to the host system.

Schematic PCB

Simple 78K/V850/LPC programmer

In early 2005, NEC Electronics launched small-pin-count microcontrollers such as PIC/AVR based on the 78K0S architecture. The 78K architecture has a register set similar to the i8085 and additional bit manipulation instructions. It is said to be a classic architecture, but the memory organization is simpler than PIC/AVR. There are various devices with dedicated peripherals, and the 78K series occupies a considerable share of industrial equipment. In the early days, only OTP/Mask products were available, so they were not popular among electronic crafts. However, the small pin count 78K series with flash memory is getting some attention from Japanese microcontroller geeks. Powerful IDEs (compilers, assemblers, simulators, etc.) are also provided for free. I built a very simple 78K0S flash programming adapter for these devices. Additionally, I built a universal programming adapter for V850ES, LPCxxxx, STM32F, etc.

Schematic PCB

DIY handheld gamma ray spectrometer based on Raspberry Pi Pico

Although Geiger counters can be used to detect amounts of radiation, and with some tricks can also differentiate between the three types of radiation (alpha, beta, and gamma), their use is limited in identifying radioactive materials. For this purpose, gamma-ray spectrometers come in handy.

Schematic PCB

TI high-speed oscilloscope reference design (sampling rate 12.8Gsps, bandwidth 6GHz, 12bit resolution)

The complete PCB related files are open source, and there is also a design document for reference and study.

Schematic PCB

CN0277

18-bit, 5 MSPS data acquisition system optimized for AC performance

Schematic PCB

Use waste water bottles to produce 3D printer filament recycling machine

3D printer filament can be produced from discarded water bottles, which will serve two key purposes: recycling plastic waste and producing 3D printer filament at extremely low cost.

The authors hope that as many people as possible will replicate and improve on this project. Therefore, all CAD, firmware and other resources are open source. Special consideration was also given to ensuring that all parts and tools used in the build process were easily sourced.

Schematic PCB

Electronic door guarding (knock detection, reminder)

The acceleration sensing unit (RSL10+KX023) attached to the back of the door is used to detect vibration and movement to detect events such as opening the door and knocking on the door. It also interacts with the terminal through information through BLE and can view the log on the handheld terminal. Handheld terminals are also implemented with RSL10. After powering on, it automatically scans the target device and connects to it. After connecting, it obtains the time and date information of the device (which can be modified at this time), and then enters the log interface. The wireless sensing unit and the BLE terminal exchange information through the BLE connection.

Schematic PCB

IMX6SLEVK: i.MX 6SoloLite Evaluation Kit

NXPProvides highly flexible, market-ready development tools in an evaluation kit based on the i.MX 6SoloLite applications processor.

Schematic PCB

Open Source 150M Oscilloscope Differential Probe

The PD150 is a compact 150MHz differential oscilloscope probe for engineers on a budget and advanced hobbyists. It has advanced features such as automatic DC offset voltage zeroing and low-frequency common-mode rejection tuning. It will also provide complete documentation in the spirit of old-school "anchor" test equipment, detailing its working principles in addition to typical instructions and specifications.

Schematic PCB

Electric vehicle power inverter control reference platform

NXP's ASIL-D automotive system platform is a reference design that enables high-voltage power inverter control to drive electric vehicle traction motors and DC-DC converters.

Interactive Memory Technology Learning Kit Core64

Core64 combines real core memory and LEDs in a unique interactive way. Core Memory is a magnetic memory technology from the 1960s and 1970s. The tip of the stylus has a magnet that interacts with the LED through Core Memory. In practice, users can think of it as a magnetic touch screen

Schematic PCB

GPSMUX: GPS Multiplexer

This board and associated firmware can be used to switch between two serial NMEA GPS feeds based on repair status. The resulting feed is transmitted over a third serial line with RS232 levels. This board is designed around the Cypress PSoC CY8C27143. The PCB is designed using KiCAD.

Schematic PCB

Voice and vision module based on ESP32S3

Use ESP32S3 to develop a general module with speech recognition and visual recognition functions. It is mainly used for education, science and technology competitions, and creative design of DIY enthusiasts. The interface and functions are compatible with OpenMV, and its IDE can be used as development and debugging software. Most of the overall hardware design is compatible with ESP32S-EYE, so with a little adjustment of the interface definition, it can be compatible with ESP-WHO. ESP-WHO provides examples such as face detection, face recognition, cat face detection and gesture recognition, thus making this software The module is very playable.

Schematic PCB

pmod-quad-7segment: PMOD of four 7-segment digital tubes

A PMOD with a quad 7-segment display connected to a pair of 74hc595 shift registers. There are 3 tactile buttons.

Schematic PCB

ESP32+RP2040 two-in-one design board (schematic and PCB)

Schematic PCB

OM6716: Transponder Evaluation and Development Kit 2, RKE/PKE with RF Board

OM6716 is a transponder evaluation and development tool for HITAG transponders and used with the 434 MHz UHF band RF expansion board for RKE/PKE applications.