The EVALST-ISOSD61L is a full-featured evaluation board designed to allow the user to evaluate all the features of the ISOSD61L isolated analog-to-digital converter (ADC).
The EVALST-ISOSD61T is a full-featured evaluation board designed to allow the user to evaluate all the features of the ISOSD61 isolated analog-to-digital converter (ADC).
The EVLKST8500GH hybrid connectivity solution for the ST8500 SoC platform combines the advantages of both PLC and RF technologies to enable applications with the best coverage in any network conditions and topologies.
The EVLKST8500GH hybrid connectivity solution for the ST8500 SoC platform combines the advantages of both PLC and RF technologies to enable applications with the best coverage in any network conditions and topologies.
The STEVAL-ISA211V1 flyback converter is designed for industrial or photovoltaic sectors to be used as an auxiliary power supply.
The EVALMASTERGAN2 board is an easy to use and quick to adapt tool to evaluate the characteristics of MASTERGAN2 and to quickly create new topologies without the need of complete PCB design.
The EVALSTISO62XV1 allows a complete evaluation of the dual channel digital isolators of the STISO family.
The STEVAL-PCC020V2 is a board with the purpose to interface a Windows® based PC with HVDPS products such as STNRG01x or STone. It is basically a bidirectional bridge between USB and I²C/UART buses.
Nuvoton smart meter solution uses NuMicro® M2351/M2354 microcontroller based on Armv8-M TrustZone® architecture. By integrating in-house security technology, the solution provides the infrastructure for Advanced Meter Infrastructure (AMI), including device identification, communications security, remote management and secure over-the-air firmware updates (OTA).
This project uses the LSM6DSOX+STEVAL-MKI109V3 mode for preliminary sensor learning and research, mainly from training the acceleration sensor to detect vibration and recording vibration waveforms, training the gyroscope sensor to detect the vibration direction and offset, and recording the waveform for analysis; combined with the acceleration sensor and the action data of the gyroscope sensor can determine the vibration intensity and direction of the wind turbine tower under various working conditions; in practical applications, the LSM6DSOX sensor is combined with the low-power chip STM32L010RBT6 chip, and the main control board on the local side leads to an alarm relay. The outlet is used for alarm output on the wind turbine tower side. It is connected to the wind turbine scada system through 485 serial port communication to upload the recorded data on the local side to provide real-time feedback on the working status of the wind turbine tower. It can be used to analyze the vibration reverse and wind turbine tower vibration. Swing direction recording can also record and analyze the natural frequency of the wind turbine tower under normal conditions and the natural frequency during faults. The multi-faceted data forms a wind turbine tower disaster warning system that can be sensed in advance;
Quick and easy migration from DC ports to Type-C
5 V / 0.6 A Buck converter based on VIPER319X
15 V / 1.2 A SSR Flyback converter based on VIPer318L
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
