Wireless communication based on NRF24 and Arduino Pro Micro

Wireless Communication with NRF24 and Arduino Pro Micro

Schematic PCB

Wireless car card with RF module

2 Layers PCB 100 x 100 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen; This card is part of the chassis to build a wireless car controlled with the RX480 RF module.

Schematic PCB

Personnel wireless alarm

2-layer PCB 46 x 75 mm FR-4, 1.6 mm, 1, HASL with leads, black solder mask, white silk screen; With this simple circuit you can make a wireless people counter.​

Schematic PCB

Portable wireless touch remote control

A tiny potable remote that can be customized to do different tasks using touch functionalities of ESP32

Schematic PCB

Prototype boards for ESP8266, ESP32 and ESP32-S2 modules

This is a prototype board for use with ESP8266, ESP32 and ESP32-S2 modules. The board is divided into areas that can be cut and then put together to build advanced IoT prototypes. After cutting as shown in the picture, you can start assembling the IoT device.

Schematic PCB

Software and hardware open source portable monitor CatSniffer (schematic diagram, PCB, source code, etc.)

This board is a Swiss Army Knife for IoT security researchers, developers, and enthusiasts. The board can be used with different types of software, including third-party sniffers such as SmartRF Packet Sniffer, Sniffle, zigbee2mqtt, Z-Stack-firmware, Ubiqua Protocol Analyzer, our custom firmware, or you can even Specific software requires writing your own software.

Schematic PCB

A tiny, open source USB computer for security applications

The USB armory Mk II is a full-featured computer (900 MHz ARM® processor, 512 MB RAM, Bluetooth, USB-C) in a small form factor, designed from the ground up with information security applications in mind.

Schematic PCB

GoWired Multiprotocol Gateway: The versatile hub for all wired communications

The GoWired Multi-Protocol Gateway is an evolution of one of our previous development boards, the GetWired Ethernet Gateway, with more power, more features, more functionality and a better solution for wired automation systems. It features a powerful ARM M0+ microcontroller with 8x the ROM and 16x the RAM memory. We doubled the RS485 transceiver to be able to use two different communication protocols simultaneously (MySensors, MODBUS, etc.) and added a CAN transceiver as it is also widely used in home automation. USB obviously has to be included as well. To ensure reliable Ethernet communication, we use the market-leading Wiznet W5500 chip. The microcontroller internal memory can be expanded via SD card, for example. G. Used to collect debugging information. The GoWired multi-protocol gateway also features improved power circuitry and can now handle a voltage range of 7-26 VDC. Onboard current and power monitors can periodically share power-related data, as well as other information about device status. For example, an e-ink screen can be used to display this information. All of this is designed with reliability and safety in mind, especially in terms of power supply (ESD, overcurrent, overvoltage, reverse polarity protection) and EMC and EMI precautions. The device is housed in a compact four-slot DIN rail enclosure.

Schematic PCB

CaribouLite RPi HAT: Fully open source dual-channel SDR Raspberry Pi HAT with tuning range up to 6 GHz (schematic, PCB, source code, etc.)

CaribouLite is an affordable open source dual-channel software-defined radio (SDR) platform and an SDR-focused FPGA development framework implemented as a Raspberry Pi (RPi) HAT. CaribouLite turns your Raspberry Pi single-board computer (SBC) into a standalone dual-channel radio Tx/Rx with a tunable spectrum up to 6 GHz. CaribouLite gives you complete control over its hardware, including FPGA, firmware, and all supporting software. With the deeply integrated IceStorm toolchain, writing your own FPGA applications couldn't be easier. You can reuse many Verilog modules, such as the SPI and SMI modules, to support custom applications for CaribouLite hardware.

Schematic PCB

GitHub developers make their own Mars rover, and the tutorial is fully open source

-

Schematic PCB

Open source DIY: WiFi, 4G, 5G remote control drones/unmanned ships, image transmission/data transmission/remote control integration!

Use an idle Android phone to place it on a drone or unmanned vehicle/boat to realize wifi, 4G, 5G remote control of the drone, image transmission/data transmission/remote control integration. Supports APM and Pixhawk flight control (as long as it is compatible with Mavlink protocol), supports RTK differential GPS high-precision positioning (optional function, requires ublox NEO-M8P GPS module and Qianxun FindCM service account).

Schematic PCB

Homemade lidar for $100

A Russian Github master has open sourced a DIY lidar project, from PCB to host computer software.

Schematic PCB

FossaSat-1 - the smallest satellite ever launched into space

FossaSat-1 uses cheap LoRa modules to provide free and open source IoT communications around the world, allowing students to communicate with satellites for less than 20 euros.

Schematic PCB

Joint debugging and listening device solution based on STM32 (schematic diagram, PCB source file, debugging tools, video)

Joint debugging and listening device solution based on STM32 (schematic diagram, PCB source file, debugging tools, video).

Schematic PCB