Reference design (RD) shows a dual-band, triple-mode CDMA front-end IC tuned to provide +20dBm in low-gain high-linearity mode. The RD features a CDMA low-noise amplifier (LNA) that is also useful for TDMA, GSM, EDGE, and WCDMA applications.The MAX2323 LNA/mixer is featured.
The MAX3580 DVB-T reference design meets NorDig 1.0.3 and MBRAI requirements. This NIM design includes the MAX3580 direct-conversion tuner and a DVB-T demodulator/decoder. A discrete, active loop-through with low power consumption and low cost is included. Target applications include digital televisions, digital terrestrial set-tops, laptop televisions, automotive televisions, and USB peripherals.
The MAXREFDES46# subsystem reference design meets the needs of modern factory control nodes by featuring four, dense, highly accurate analog inputs and outputs in a compact, galvanically isolated form factor. Analog input channels measure current or voltage and analog output channels provide current or voltage . This design uniquely fits programmable logic controllers (PLC), distributed control systems (DCS), and other industrial applications. Hardware and firmware design files and lab measurements are provided for rapid prototyping and development. The board is also available for purchase.
Low-cost NXP Freedom development platform for Kinetis K20 USB MCU
Maxim's MAXREFDES36# reference design is an IO-Link, low-power, 16-channel digital input hub compliant with IEC 61131-9. It contains two octal digital input serializers, an IO-Link transceiver and efficient step-down converter. The entire design fits in a standard DIN rail printed circuit board (PCB) holder.
This evaluation kit supports the fully integrated MC34717EP Dual Switch-Mode Power Supply—a dual-synchronous, buck-switching regulator.
The FRDM-MC-LVPMSM low-voltage, 3-phase permanent magnet synchronous motor (PMSM) Freedom development board platform adds motor control functions such as rotation or linear motion to your design applications.
Mainly using GD32F350 to make a light source controller to provide stable light source control for machine vision cameras, adding an external trigger function that can be connected to an external 24V signal (photoelectric sensor or PLC input), and a 24V output signal to trigger the camera to take pictures. Due to the diversity of application scenarios here, it is necessary to add user process configuration to control how long and when the four light sources are turned on respectively. Due to the life of the light source and the general glare of the light source, a parameter power-off retention function is added. In addition, it is also extended WIFI function. Live application scenarios are also tested in the video.
The Industrial Linux SDK comes with Xenomai real-time Linux and supports the time-sensitive network Layer Scape reference design.
The development of the water level measurement voice alarm device is based on GigaDevice Innovation GD32E231C-START evaluation board. It can measure, display, give voice warnings, and report water levels to the cloud. Suitable for IoT monitoring of containers holding liquids such as rain counters and small water tanks.
Detect whether there is smoke and flammable gas in the environment. If the above gases are present, send an alarm text message to the mobile phone.
Freedom KL25Z is an ultra-low-cost development platform for Kinetis ® L series MCUs based on Arm ® Cortex ® -M0+ processor .
The board of this design is intended to sit between the fundamental and harmonic boards and monitor the SPI data running to the display. Onboard ECP5 will mirror the display and output a copy to a digital monitor.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This project is a splitter that outputs video to a regular digital display and also supports input from a digital display.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
