Low noise, low distortion single-ended input driver circuit for differential input IF sampling ADC
MAXREFDES89# is an mbed®-compatible shield for the rapid development of brushed DC motor applications. The shield contains four MAX14871 full-bridge DC motor drivers for driving up to 4 motors. A MAX17501 DC-DC converter allows the system to operate from a single 7 to 36VDC power supply. Four MAX4704 4:1 multiplexers permit setting the current regulation mode of the MAX14871, while two MAX5387 digital potentiometers provide the ability to set the motor current limit. A MAX7300 GPIO expander supports interfacing each motor driver circuit to the mbed enabled microcontroller platform.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This design splits the video output to a regular digital display and also supports input from the digital display. It connects to the SERDES via a SYZYGY-TXR connector. Would love to be able to test the 5Gbps output of high resolution GPDI.
6-Channel Li-Ion Battery Controller MC33772 Evaluation Board Targets Automotive and Industrial Applications with Isolated Daisy-Chain Communication
The average power consumption of this solution during standby is < 1 μA, and it can maintain standby state with low power consumption, and the data is still maintained when the power is turned off. This solution uses the LoRa transmission protocol to implement wireless update data function. Any host device can send data through the LoRa host module to update the electronic paper display content.
Simple branching of HDMI cable signals for analysis/verification of signal level and phase.
The SABER board for smart devices is based on the i.MX 6Quad processor and supports 4-core processing, low-power multimedia and graphics applications.
The Fremont (MAXREFDES6#) subsystem reference design meets the high-resolution needs of low-voltage output sensor applications. Boards for purchase, hardware and firmware design files, and FFTs and histograms from lab measurements provide complete system information for rapid prototyping and development.
The MAXREFDES63# reference design ushers in the era of Industry 4.0. This design meets the higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features eight channels of digital outputs and a complete, efficient power-supply system. Hardware and firmware design files are provided.
This reference design demonstrates the performance of the MAX44285 dual-channel, high-precision, high-voltage, current-sense amplifier. It is a Pmod module that contains all the necessary circuitry required for the design of a current and temperature monitoring system.
This module uses the highly integrated MAX2830 RF transceiver. It is a complete RF front-end solution that meets the WLAN IEEESM 802.11b/g standard. The transmitter can deliver more than 15dBm Tx power at EVM < 5.6% with a 54Mbps OFDM 802.11g signal. The receiver can provide an IQ signal EVM
The MAX3541 is an integrated, single-conversion terrestrial tuner IC for DVB-T and PAL. The device is designed to convert input signals in the VHF-Low, VHF-High, and UHF bands to an IF frequency of 36MHz. The MAX3541 is designed for television, analog/digital terrestrial receiver, and digital set-top box applications.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
