This application note assesses a tuned, dual-band, front-end CDMA IC with single 110MHZ IF. Focus is on the MAX2322, a low-noise amplifier (LNA) for dual-band CDMA cell-phone handsets. The MAX2323 can also be used in dual-band TDMA, GSM, EDGE, or WCDMA applications.
The MAXREFDES1274 is a buck converter using the MAX17501F high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs and internal compensation.
NXPKIT9Z1J638EVM is a hardware tool for rapid prototyping of current, voltage and temperature sensing applications using MCUs.
6-channel Li-ion battery controller MC33772 EVB targets automotive and industrial applications with SPI communication
The LPC8N04 development board is a low-cost development board equipped with the LPC8N04 and supports MCUXpresso IDE.
This reference design (RD) shows how a CDMA PA, the MAX2265, provides -45dBc ACPR at +28.5dBm. Low-cost cellular CDMA power amplifier has good linearity and power-added efficiency for US cellular-band IS-95-based CDMA , PDC, and IS-136-based TDMA modulation formats. Schematics and performance data are shown.
The FRDM-GD3000EVB is an easy-to-use board that allows users to practice all functions of the MC34GD3000 pre-driver.
The LPCXpresso55S69 development board provides an ideal platform for evaluation and development of the LPC55S6x MCU family.
Wideband low error vector magnitude (EVM) direct conversion transmitter using LO divide-by-2 modulator
The PQ2FADS-VR board is designed to provide an evaluation platform for MPC82xx derivatives in a 516-pin PBGA (VR or ZQ) package to support hardware and software developers of PowerQUICC II family devices.
The NTAG I²C+ Explorer Kit is an all-in-one demonstration/development resource for NFC connected tags. Additional NFC readers included.
This application note presents four categories of 1-Wire master circuits for embedded applications and discusses their capabilities and requirements in relation to available (ie, unused) system resources. The schematics shown here apply to short networks that do not extend beyond the radius of 1 meter and are populated with a small number of 1-Wire slaves. Instructions and a decision worksheet are included to identify the most cost-effective 1-Wire master for the application. The reader should be familiar with the basics of
The NVT2008PW (OM13317) and NVT2010PW (OM13324) demonstration boards are designed to allow customers to evaluate NXP's 8- or 10-channel bidirectional voltage level translators.
FRDM-KL28Z is a development board for Kinetis KL28 72Mhz 32-bit Arm ® Cortex ® -M0+.
This reference design is a commercial Half-NIM DVB-S tuner that uses Maxim's MAX2120 satellite tuner IC. The reference design connects to the motherboard through a 12-pin connector. The downconverted satellite signal from the LNB is supplied to an active, discrete loop-through, which splits the signal into two paths. One signal goes to the MAX2120 and the other provides an additional output from the STB.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
