MAXREFDES64#: 8-channel digital input micro PLC card

The MAXREFDES64# reference design ushers in the era of Industry 4.0. This design meets the higher voltage needs of industrial control and industrial automation applications while consuming minimal power and space. This high-performance system features eight channels of digital inputs and a complete, efficient power-supply system. Hardware and firmware design files are provided.

MCIMX6ULL-EVK: Evaluation Kit for i.MX 6ULL ​​and 6ULZ Applications Processors

MAX2550-MAX2553 Transceiver Femtocell Wireless Reference Design

The MAX2550 is a complete single-chip radio transceiver for UMTS band 1 femtocell applications. The RD2550 reference design is based on the MAX2550 and contains all of the relevant components necessary to design and build a competitive radio solution to support the base-station transceiver (BTS) frequency band: 1920MHz to 1980MHz (Rx) and 2110MHz to 2170MHz (Tx). The RD2550 also supports downlink monitoring of surrounding macrocells. This enables the system to select the most suitable operating conditions (power, codes, frequencies, capacity, etc.).

FRDM-CD1030EVM: FRDM-CD1030EVM Switch Detection Interface Evaluation Kit Quick Start

Schematic PCB

MAXREFDES1273: PoE-powered device and 48V 850mA active-clamped forward DC-DC converter using the MAX5974C and MAX5969B

The MAXREFDES1273 is a Power-over-Ethernet (PoE) powered device (PD) and an active clamp forward DC-DC converter (ACFC) that delivers up to 850mA at 48V from 39V to 57V supply voltage

Schematic PCB

OM13315: NVT2001GM demonstration board

DM9000 EMI test circuit reference

DM9000 EMI test circuit reference

Schematic PCB

Sensor Toolbox development board for 9-axis solutions using MMA8652FC, FXAS21002C and MAG3110 sensors

Schematic PCB

OM7863: BGA3015 Demonstration Board, 5 MHz to 300 MHz 15 dB Gain Inverse Amplifier Application

BGA3015 Demonstration Board, 5 MHz to 300 MHz 15 dB Gain Inverting Amplifier Application

Schematic PCB

MAXREFDES115#: Isolated 24V to 5V 20W power supply

MAXREFDES115# is an efficient active clamp topology design with 24V input, and a 5V output at 4A (20W) of power. The design features the MAX17599, an active clamp, current-mode PWM controller optimized for industrial supplies.

OM13526UL: PCAL6524 Fm+ I ² C 24-bit general-purpose IO demonstration board

OM13526UL is a PCAL6524 24-bit general-purpose IO evaluation board that enables bidirectional voltage level conversion and GPIO expansion.

PCA85263ATL-ARD Evaluation Board

Schematic PCB

Second stage Ku-band LNA using BFU730F in LNB satellite applications

Second stage Ku band LNA using BFU730F in a LNB satellite application

FRDM-MC-LVMTR: Low voltage 3-phase motor kit for FRDM platform

The FRDM-MC-LVMTR is a low voltage 3-phase motor designed for use in FRDM development systems.

Smart Gate Drive Coupler Evaluation Board

This reference design provides design guidelines, data, and more for the smart gate drive coupler evaluation board.

Schematic PCB

TWR-K40D100M: Kinetis K40 100 MHz low-power MCU tower system module

Kinetis K40 (Arm Cortex™-M4) MCU module for the Tower System

FRDM-17511EVB: Freedom expansion board - MPC17510, H-bridge, brushed DC motor driver, 2.0V-6.8V, 1A

Schematic PCB

ZigBee USB Virtual Gateway Reference Design Using EM3588

ZigBee USB Virtual Gateway Reference Design Using EM3588

Schematic PCB

MAXREFDES1251: Single-Output Flyback Converter Using the MAX17596

The MAX17596 is a peak-current-mode controller for designing the wide input-voltage flyback regulators.

Schematic PCB

OM13084: LPCXpresso43S67 development board