ReflowMaster: open source reflow master control based on the magic oven (schematic, PCB, gerber, source code, etc.)

Reflow Master Pro is designed to work in any oven - no algorithm adjustments required! That said, if you really want to tweak, you can switch from the classic Reflow Master algorithm to PID control and adjust your settings to your liking.

Schematic PCB

TEA1721ADB1061: TEA1721 Isolated Universal Mains Flyback Converter Demo Board

5.5-inch LCD screen

Schematic PCB

USB-C "switch", hardware open source, firmware provided

The basic functions of USB-C are supported, such as high-speed communication and charging functions. Then this design solves the problem of painless switching between one host and multiple devices, or one device and multiple hosts.

Schematic PCB

10.5GHz (X-band) patch antenna

4 Layers PCB 60 x 171 mm FR-4, 1.6 mm, 1, HASL lead free, Green Solder Mask, White silkscreen;10.5GHz, 8 element, patch antenna. Make your own phased array for communications or radar. Full instructions at github .com/jonkraft

Schematic PCB

MAXREFDES69#: Isolated RS-485 communication micro PLC card

With dual-isolated RS-485 communication channels for the next generation of ultra-small programmable logic controllers, the MAXREFDES69# meets the data rate and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features two full-duplex RS-485 transceivers with integrated transformer drivers for efficient and compact power and data isolation.

OM7896: BGU8103 GNSS LNA Evaluation Board

OM17056: Demonstration board for BGU6102 low noise amplifier, ISM and LTE bands

BGU6102 Unrivaled MMIC, Low Noise Amplifier for ISM and LTE Bands

TWR-56F8200: Tower System Module for MC56F826xx and MC56F827xx

Schematic PCB

KITMPVZ5004EVK: Pressure Sensor Water Level Evaluation Board

Layerscape LS1046A Reference Design Board

OM13085: LPCXpresso board for LPC1769 with CMSIS DAP hardware debugger

LPCXpresso board for LPC1769 with CMSIS DAP hardware debugger

Schematic PCB

MAXREFDES1209: Non-isolated 12V/0.5A 6W step-down converter using MAX17501

The MAXREFDES1209 operates over a 14V to 60V input voltage range to deliver output voltage regulated at 12V and up to 500mA of load current.

Schematic PCB

ChipWhisperer - Automotive grade chip blasting equipment

ChipWhisperer is a complete open source tool chain launched by NewAE for side-channel power analysis and fault attacks. The tool chain includes hardware, host computer software, and hardware chip firmware, all open source on Github. This set of equipment is mainly dedicated to hardware security research.

Schematic PCB

OM13099: CAN-FD dual transceiver Shield expansion board

OM13099 CAN-FD Shield expansion board for LPCXpresso54628 and LPCXpresso54608 evaluation boards

FRDM-17531EP-EVB: Freedom expansion board - MPC17531A, dual H-bridge, stepper motor driver, 2.0V-8.6V, 0.7A

OM17041: BGU8063 Evaluation Board

BGU8063 Evaluation Board

i.MX31PDK: i.MX31 Product Development Kit

Schematic PCB

u-blox Wi-Fi^® Evaluation Kits: EVK-LILY-W131 & EVK-LILY-W132

MAXREFDES1210: 96W, 12V two-phase SEPIC using MAX16990

The MAX16990 is a high-performance, current-mode, pulse-width mode (PWM) controller with 4μA (typ) shutdown current for wide input-voltage range boost converters/single-ended primary-inductor converters (SEPIC)

Schematic PCB