OM6716 is a transponder evaluation and development tool for HITAG transponders and used with the 434 MHz UHF band RF expansion board for RKE/PKE applications.
The Sonoma (MAXREFDES14#) subsystem reference design performs accurate AC energy measurement while utilizing a unique, low-cost galvanic isolation architecture. The Sonoma meets the high-accuracy and low-cost needs of energy-measurement applications. This small form-factor design is available for purchase. Hardware, firmware design files, and lab measurements provide complete system information for rapid prototyping and development.
This reference design (RD) is for a dual-band, triple-mode front-end IC using only 85MHz IF centers for processing PCS, cellular CDMA, and cellular AMPS. The RD uses the MAX2323, a low-noise amplifier (LNA) with mixer, that is useful for TDMA, GSM, EDGE, and WCDMA applications.
This reference design (RD) for an RF mixer in the FM (AMPS) signal path custom tunes the output matching circuit to optimize the trade-off between IIP3 and the highest gain. The design features the MAX2324 low-noise amplifier (LNA) with RF mixer for cellular-band CDMA, TDMA, GMS, and EDGE applications.
Automotive NFC Door Handle
This compact USB dongle design combines a MAX2165 direct-conversion tuner and a DMB-TH demodulator. The design converts a UHF signal (470MHz to 858MHz) to a MPEG-2 transport stream. Then the USB interface enables video viewing on a laptop or desktop computer.
Based on NXPThe Ethernet Video Development Kit for the MPC5604E MCU is suitable for next-generation automotive and general market camera applications.
This reference design (RD) shows how a downconverter with selectable LO doubler can be used as an upconverter. The RD achieves 9dB gain and 1.3dBm IIP3. The MAX2683 low-power downconverter designed to operate in the receive path of 3.5GHz wireless data transceivers is featured. Schematics, test setup, BOM, and performance results are shown.
WiCAN is a powerful CAN adapter based on ESP32-C3 that can be used for car hacking and general CAN bus development. It is available in two form factors: OBD-II and standard USB-CAN. The original firmware can interact directly with RealDash using Wi-Fi or BLE, which allows you to create custom dashboards with beautiful graphics. It is available for Android, iOS, and Windows 10. WiCAN connects to your existing Wi-Fi network and any device on that network, and it allows you to configure Wi-Fi and CAN settings through a built-in web interface. Both versions have a power saving mode that detects when the voltage drops below 13 V or other preset values. When this power saving mode is enabled, WiCAN is able to enter sleep mode, reducing the current consumption to less than 1 mA.
Adopt ADAV801/ADAV803 audio codec to implement S/PDIF and I 2 S interface with SigmaDSP codec
MTRCKTSBN5643L: Single 3-phase Sensorless BLDC Development Kit with Qorivva MPC5643L MCU.
The NXP® MPC5606E MCU is a gateway system built on Power Architecture® technology designed to move data from disparate sources over Ethernet.
The MTRCKTSBN5604P motor control development kit is ideal for sensorless applications requiring one BLDC motor, such as HVAC or electric pumps.
This is a fun electronic toy car that features power-ups! The author uses color sensors and magnetic switches to trigger fun tricks like acceleration, deceleration, and rotation. It draws a lot of inspiration from Mario Kart.
After a failed Kickstarter campaign, the author has now open-sourced the software, hardware, and mechanics.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
