CN0283

Provides fixed power gain at the output of the IQ modulator

Schematic PCB

SABER board based on i.MX 6QuadPlus application processor for smart devices

OM13503: PCA8539 Demonstration Board

MPC5604EEVB64: MPC5604E Evaluation Board

CN0187

Crest factor, peak and rms RF power measurement circuit optimized for high speed, low power and single 3.3 V supply

Schematic PCB

MIMXRT1050-EVK: i.MX RT1050 Evaluation Kit

The i.MX RT1050 EVK is an entry-level, low-cost development platform equipped with the i.MX RT1050 crossover processor based on Arm Cortex-M7.

REP007: Driving the IFR3100 IF Demodulator with a Cellular Front-End IC

This reference design (RD) shows how a dual-band, dual-mode CDMA front-end IC can drive an IRF3100 IF demodulator. The RD features the MAX2323 CDMA low-noise amplifier which is also useful for TDMA, GSM, EDGE, and WCDMA applications. Schematics, the bill of materials (BOM), and performance results are shown.

Schematic PCB

FRDM-K22F-AGMP03: Sensor Toolbox development board for 10-axis solution using FXLS8962AF, FXAS21002C, MAG3110 and MPL3115A2

XPC563MKIT: Evaluation system supports NXP® MPC563xM

Schematic PCB

KEA128-3-phase sensorless BLDC

Reference design for building your own automotive 3-phase BLDC motor control.

Schematic PCB

KITVR5500AEEVM: VR5500/FS5502 PMIC Evaluation Board

Schematic PCB

BATT-14AAAPACK: Configurable battery pack powers MC33771/MC33772 evaluation board

The BATT-14AAAPACK is a configurable battery pack that can power the MC33771 or MC33772 evaluation board.

Schematic PCB

M523xEVB: MCF5235 Evaluation Board

Schematic PCB

KITFS85SKTEVM: FS84/FS85/FS66 safety SBC programming board

Schematic PCB

CN0248

IQ demodulator-based IF to baseband receiver with variable IF and baseband gain and programmable baseband filtering

Schematic PCB

OM13535: SA602AD + SA604AD Demonstration Board

OM13531: SA606DK Evaluation Demonstration Board

MPC5777M Engine Management Evaluation System

Schematic PCB

CN0156

Amplitude control circuit for AD9834 waveform generator (DDS)

Schematic PCB

REP005: Dual-band CDMA tuning front-end using inexpensive 85MHz IF SAW devices

This reference design (RD) is for a dual-band, triple-mode CDMA front-end IC tuned for use with IF SAW filters. The RD modifies the FM/cellular/PCS mixers to a common 85MHz IF. The design uses a low -noise amplifier (LNA) with mixer, the MAX2320, that is also useful for TDMA, GSM, and EDGE applications. Schematics and bill of materials are shown.

Schematic PCB