ESP32-Wifi real-time desktop

Use the PIO plug-in of VSCode to directly open the project folder under the Code directory for compilation~

Schematic PCB

Layerscape LS1043A Reference Design Board

Schematic PCB

T4240RDB: QorIQ^® T4240 Reference Design Board

Schematic PCB

T4240QDS: QorIQ^® T4240 Development System

Layerscape LS1046A Reference Design Board

EtherCAT Slave Device and Multi-Protocol Industrial Ethernet Reference Design

This reference design implements a cost-optimized, high-EMC immunity EtherCAT slave (dual port) with an SPI interface to the application processor. The hardware design leverages the AMIC110 industrial communications processor to support multi-protocol industrial Ethernet and fieldbuses. The design is powered by a single 5V supply; the PMIC generates all necessary on-board rails. The EtherCAT slave stack can run on the AMIC110 or on an application processor using the Serial Peripheral Interface (SPI). Using hardware switches, the AMIC110 can be configured to boot EtherCAT slave firmware from SPI flash memory or from the application processor via SPI. The design has been tested for IEC61800-3 EMC immunity with a standard industrial PLC running an EtherCAT master. JTAG interface speeds custom firmware development.

Schematic PCB

People Counting Reference Design for Demand Controlled Ventilation via 3D Time of Flight (ToF)

The Demand Controlled Ventilation People Counting Reference Design with 3D Time of Flight (ToF) is a subsystem solution that uses TI's 3D ToF image sensor and tracking and detection algorithms to count people in a given area, enabling high resolution and high precision. The sensor technology was developed in standard CMOS, enabling high levels of system integration at low system cost. Because ToF image sensors process visualization data in three dimensions, the sensor can detect the precise shape of the human body and track a person's movement and position (including minute changes in movement) with unprecedented accuracy. As a result, ToF cameras can perform real-time people counting and people tracking functions more efficiently than traditional surveillance cameras and video analytics.

Schematic PCB

WF111 development kit design information

The WF111 is a fully integrated single 2.4 GHz band 802.11 b/g/n module designed for portable and battery-powered applications requiring Wi-Fi connectivity. The WF111 integrates an IEEE 802.11 b/g/n radio, antenna or U.FL antenna connector, and SDIO host interface. It provides a low-cost and simple Wi-Fi solution for devices running an operating system and an onboard TCP/IP stack, but still offers the advantages of modules - small size, certification and ease of integration. Silicon Labs also provides WF111 drivers for Linux and Android operating systems. WF111 has hardware support for Wi-Fi encryption protocols.

Schematic PCB

WF121 Wi-Fi Development Kit

The WF121 Development Kit provides the right environment for developing and prototyping embedded Wi-Fi® applications using the WF121 Wi-Fi module. The development kit contains a ready-to-use hardware platform and a Wi-Fi software development kit that includes all necessary documentation and PC tools.

Schematic PCB

server

A server is a system that integrates hardware and software to respond to demands from the network and provide corresponding services. Servers usually need to run for a long time, so reliability is a very important factor. For the application of this server, Nuvoton Technology provides several product combinations with matching functions.

MAXREFDES1238: Scalable, single-input, 6-output, power supply solution for Version ACAP platform

In this design a single 12V input supplies a circuit which outputs 6 separate rails ranging from 500mW to 130W. The design is specified to meet the XILINX Versal ACAP AI Core Series UC1/3 requirements. The design layout is also optimized for the Versal ACAP IC.

Schematic PCB

T1040RDB: QorIQ ^® T1040 Reference Design Board

The QorIQ ^® T1040 Reference Design Board is a high-performance evaluation, development and test platform supporting the T1040/20 communications processor.

Schematic PCB

QorIQ ^® LS1012A Development Board

The LS1012A-RDB is a compact tool that can be used to evaluate LS1012A solutions for consumer electronics, industrial control and networking applications.

Schematic PCB

QorIQ ^® LS1024A Development Board

The LS1024A-RDB is suitable for VoIP and video home gateways, security appliances, 802.11n enterprise access points and commercial network-attached storage products.

Layerscape FRWY-LS1012A circuit board

This tool optimizes the FRDM-LS1012A, adds more features, and is suitable for IoT, edge computing and other advanced embedded applications, providing a more excellent hands-on experience. These features include easy access to processor I/O, low power operation, Micro SD card storage, M2 connector, small form factor, and expansion board options via mikroBUS.

Schematic PCB

QorIQ ^® LS1088A Development Board

The QorIQ LS1088A Development Board is a comprehensive platform for designing and evaluating the QorIQ LS1088A processor. This RDB comes preloaded with the standard Linux kernel-based Board Support Package (BSP).

Schematic PCB

QorIQ LX2160A development board

The LX2160A development board is used to design and evaluate the LX2160A processor. It loads the standard Linux kernel board-level support packages.

Schematic PCB

Layerscape LS1028A Reference Design Board

The LS1028A development board has most of the features of the LS1028A processor, built with a high-performance core, HMI functionality and TSN.

Schematic PCB

TWR-LS1021A: QorIQ ^® LS1021A Towersystem module

NXPThe TWR-LS1021A module is a development system using the QorIQ ^® LS1021A processor.

Schematic PCB

LS1046A highway plate

The LS1046A Highway Board (FRWY) is a high-performance computing, evaluation and development platform that supports the QorIQ LS1046A architecture processor and is capable of supporting performance of over 32,000 CorfeMarks. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 for Wi-Fi, and M2_Type_E interfaces.

Schematic PCB