This design uses the variable gain wideband amplifier VCA810 to increase the gain and expand the AGC control range, and uses software compensation to reduce the step interval of the gain adjustment and improve the accuracy. The input part uses a high-speed voltage feedback op amp 0 P A842 as a follower to increase the input impedance, and a protection circuit is added to the input part without affecting performance. Various anti-interference measures are used to reduce noise and suppress high-frequency self-excitation. The power output part is made of discrete components. The passband of the entire system is 4.4 k Hz ~ 8.4 MH z, with a minimum gain of 0 dB and a maximum gain of 70 dB. The gain step is ld B/6dB/arbitrarily set. The error between the preset gain and the actual gain below 60 dB is less than 0.2 dB. The effective value of the undistorted output voltage reaches 10.1 V, and the AGC control range is 52 dB when outputting 4.5 ~ 5.5 V.
The physical layer data sending and receiving of a PC is very simple. As long as one condition is met, that is, the CRC check of the data packet is correct, the network card can send the data packet to the application software. Otherwise, the network card will directly discard the data packet, which cannot be caught by any software. to the data packet.
1U rack size and high-efficiency power supply Total efficiency: 93% (Vin = 230V at 100% load) Dimensions: 240mm × 135mm × 40mm Suitable power devices (MOSFETs and SiC diodes) and optocouplers are available
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
