• Automatic doorbell with object detection

    Every house has a doorbell. When a visitor arrives at a home, he looks for the doorbell switch and rings it to let us know his presence. What if a person coming to your home cannot find the doorbell, or the person is too short to reach the doorbell? The object detection circuit installation below is for reference. The circuit will automatically sense the presence of a person and ring the doorbell.

  • Monitor refrigerator temperature using ESP32-DevKitC based on ML model

    Using the Edge Impulse platform, an embedded machine learning (ML) model is deployed on the ESP32-DevKitC-based sensor for temperature anomaly detection.

    Schematic PCB

  • Remote home appliance controller based on Raspberry Pi and web interface

    A project that uses a web page to remotely control the Raspberry Pi to send out infrared signals to control home appliances such as air conditioners. To put it simply, you can use your mobile phone to control it through the web page on the way home, turn on the air conditioner in advance, and set it to the required temperature. At the same time, the indoor temperature and humidity can be monitored in real time on the web page. The entire project is written based on Python's flask framework.

    Schematic PCB

  • IOT desk lamp design

    RSL10 QFN EVB is used as the main control of IOT lamps. Because the GPIO of RSL10 is limited, the data protocol adopts single-line return-to-zero code communication method. The system only needs one GPIO1 as the LED RGBW driver. GPIO is used to drive WS2812. WS2812 is a control circuit and An intelligent externally controlled LED light source with integrated light-emitting circuit. Its appearance is the same as a 5050LED lamp bead, and each component is a pixel. The pixel contains an intelligent digital interface data latch signal shaping amplification drive circuit, a high-precision internal oscillator and a 12V high-voltage programmable constant current control section, which effectively ensures that the color of the pixel light is highly consistent. , the other ADC port is used to collect the temperature of the lamp, and when the temperature exceeds the limit standard, it automatically reduces the luminous efficiency of the lamp to avoid burning out the LED due to excessive temperature.

    Schematic PCB

  • Using single-chip microcomputer AT89C51 to transform ordinary double-tub washing machine

    Ordinary double-tub washing machines have a large number of users because of their low price and durability. However, as people's pace of life accelerates, there are many inconveniences when using this kind of washing machine to wash clothes: you need to add water before washing clothes, which takes about 2 to 3 minutes. Many friends can't stand the "torture" of time and go about other things. They often forget to turn off the water, causing a lot of waste. When washing clothes, turning the timer can usually wash for up to 15 minutes. Most users don't do this process. He will stay by the washing machine. When the timer ends, he cannot time the time or rinse again in time. Sometimes he even forgets how long he has been washing, which greatly prolongs the washing time. He cannot leave people while rinsing. Someone must be involved in the whole process. Very inconvenient. This article introduces a method of using the AT89C51 microcontroller to transform an ordinary double-tub washing machine. After the transformation, the entire process of water inlet, washing, rinsing, and drainage can be completed automatically. Multiple washing and rinsing methods can be selected, and single washing, single rinsing, and Manual function, very convenient.

    Schematic PCB

  • Fully automatic washing machine program and circuit diagram

    Fully automatic washing machine program and circuit diagram

    Schematic PCB

  • Fully automatic washing machine design

    This article designs a fully automatic washing machine control system with the AT89C51 microcontroller as the core. This system realizes the control of the entire washing process of the washing machine, including the four stages of user program input, washing, dehydration and end alarm. Laundry control system based on AT89C51 microcontroller, the control panel consists of buttons, indicator lights and LCD display. The buttons select the working mode of the washing machine and the start and pause functions. The indicator lights work with the buttons, and the LCD display shows the working mode of the washing machine. The overall circuit module of the washing machine includes four independent keyboards, indicator lights, motor control and LCD display.

    Schematic PCB

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
community

Robot
development
community

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号