ChipWhisperer-Husky is a compact package for experimental side-channel power analysis and fault injection. It follows in the footsteps of our ChipWhisperer-Lite and ChipWhisperer-Pro products and adds new features such as a high-speed logic analyzer for visualizing faults, real-time data streaming for attacking asymmetric algorithms, and additional I/O Extension pins.
PICO DSP is an open source, Arduino-compatible ESP32 development board for audio and digital signal processing (DSP) applications. It provides an extensive audio processing feature set in a small, breadboard-friendly device, providing audio input, audio output, a low-noise microphone array, integrated test speaker options, additional memory, battery charge management and ESD protection all on a single micro PCB superior.
The Conexio Stratus is a small (50.8mm x 22.86mm) yet powerful development kit for creating cellular connected electronics projects. It runs the best-in-class Zephyr RTOS for connected devices and is a battery-powered platform ideal for prototyping cellular IoT systems such as asset tracking applications, environmental monitoring, smart meter monitoring, and more. Equipped with Nordic nRF9160 System-in-Package (SiP), it supports LTE-M, NB-IoT and Global Positioning System (GPS). Stratus has two external U.FL antennas onboard, one for GPS and one for LTE-M/NB-IoT, enabling it to support LTE bands worldwide.
ThunderScope is the first oscilloscope designed specifically for Thunderbolt, allowing live sample data to be streamed to your computer at over 1 GB/s. This design eliminates all limitations of traditional oscilloscopes by leveraging the powerful processing capabilities of modern devices. Measurements are made fast and easy, with cramped UIs replaced by multi-window layouts and support for modern accessibility features. Sample memory was increased from megabytes to gigabytes, and the fixed list of protocols and trigger types was replaced by an ever-expanding repo. ThunderScope is also open source, so you have complete control over your data from the moment you sample it. You can easily add your own custom features and benefit from new features built by the community.
CaribouLite is an affordable open source dual-channel software-defined radio (SDR) platform and an SDR-focused FPGA development framework implemented as a Raspberry Pi (RPi) HAT. CaribouLite turns your Raspberry Pi single-board computer (SBC) into a standalone dual-channel radio Tx/Rx with a tunable spectrum up to 6 GHz. CaribouLite gives you complete control over its hardware, including FPGA, firmware, and all supporting software. With the deeply integrated IceStorm toolchain, writing your own FPGA applications couldn't be easier. You can reuse many Verilog modules, such as the SPI and SMI modules, to support custom applications for CaribouLite hardware.
CANFDuino supports CANFD, the latest version of the CAN bus standard, which can accommodate speeds up to 5 Mbps. It has two local ports with DB9 connectors in a housing that can be mounted on your vehicle or installed in your own projects. The platform is designed for tinkerers, hackers, and industry professionals looking for a ready-made, open source CAN bus solution that requires little or no hardware assembly.
Aeroh One is a hackable infrared remote control pad that turns any remote control device into a connected device. It will support Alexa, Google Assistant, Apple Siri, iOS/Android App and IFTTT integration. The Aeroh One is compatible with most remote controls that operate via infrared.
AquaPing is an ultra-low power smart sensor that provides isolated water leak detection, even behind walls.
BeanCounter is a pocket-friendly SMT parts counter. Powered by a CR2032 coin cell battery, it uses two infrared photointerrupters to count parts as quickly as possible. It works with any opaque, 8 mm wide carrier tape up to 2 mm, and it covers most 0805 or smaller LEDs and passives, as well as SOT23 transistors.
The author specially bought a laptop motherboard, and then DIYed the peripherals and casing. The overall effect is quite beautiful.
Plant Bot is an open source project based on ESP32 that allows a single PCB to perform the functions of detecting humidity, watering, providing lighting, and controlling and communicating with the user via WiFi/BLE.
Have you ever wanted to install a security camera in your home, garden or office? Although commercial Wi-Fi security cameras on the market are not expensive, if you want to install multiple ones in different scenes or rooms, it will cost a lot of money. Young engineer Max can develop a wireless security camera based on Espressif's ESP32 chip with only $15.
Have you ever thought about attaching an inertial measurement unit (IMU) to an object to track its posture and motion? Tracer provides high-performance, safe, reliable and low-cost object tracking. Tracer can be easily attached to objects using Velcro. It can tilt and track rhythm as the bike's frame tilts, it can record the number of shots taken with a tennis racquet, and it can even differentiate between topspin and chip shots. Let your imagination run wild and explore more interesting applications of Tracer!
USB-Cereal is a powerful, fully open source development tool that simplifies testing, development, debugging and manufacturing of devices using USB-C. Using the extended capabilities of USB-C, this unique hardware saves time and effort by simplifying debugging and factory log capture, as well as firmware update procedures.
The basic concept of this work is slightly different from standard tools such as a reflow oven or soldering iron. Heat is provided from the bottom of the PCB.
This is what smart home enthusiasts want to control their entire lights, thermostat, or any other smart device from their couch without having to activate a wall switch.
Picoclick is a simple IoT button in a very small package. The size of the PCB is only 18x20mm, and the height with the 300909 battery is only about 10mm. It's able to connect to your local WiFi at an impressive speed of about 1.5 seconds on average. Yes, since it calls IOT-Button, it uses WiFi of course! This opens up countless possibilities for that little device.
Picoclick-C3 The name relates to its new processor, the ESP32-C3, a single-core RISC-V 160MHz CPU. Picoclick C3T is a small WiFi and BLE IoT button suitable for a variety of applications. Originally designed for smart homes, Picoclick can also be used as an actuator for IFTTT automation or as an MQTT device. It is based on the single-core ESP32-C3 RISC-V processor, so it has a lot of useful features. The C3T measures just 10.5mm x 18mm.
The WiFi remote control is based on ESP32 Pico D4 MCU and 160x80 pixel mini TFT display. Additionally, there are onboard I2C temperature and humidity sensors and an accelerometer.
Reflow-Controller is designed to control different types of reflow ovens, hot plates, etc. It's based on the ESP32-S2, so it can be programmed to work with WiFi applications, but it also has an onboard OLED display and three buttons for use as a standalone solution.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
