• Apply 4.15 V – 5.25 V for 5 V version or 3.00 V – 3.60 V for 3 V version to the Vcc pin. Apply 0 V to the
Vss pin.
• This controls the MCU operating mode. Connect this pin to Vss. If connecting this pin to Vcc, the
internal ROM is inhibited. In the flash memory version this pin functions as a V
PP
power supply input pin.
• These pins are the power supply inputs for analog circuitry.
• Reset input pin for active “L.”
• Connect a ceramic resonator or a quartz-crystal oscillator between the X
IN
and X
OUT
pins to set the
oscillation frequency.
• If an external clock is used, connect the clock source to the X
IN
pin and leave the X
OUT
pin open.
• Loop filter for the frequency synthesizer.
• Power supply input pin for 3.3 V USB line driver.
• USB D+ voltage signal port. Connect a 27 to 33
Ω
(recommended) resistor in series.
• USB D- voltage signal port. Connect a 27 to 33
Ω
(recommended) resistor in series.
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually programmed as either input or output.
• When connecting an external memory, these function as the address bus.
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually programmed as either input or output.
• When connecting an external memory, these function as the address bus.
• 8-bit I/O port.
• CMOS compatible input level or VIHL input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually
programmed as either input or output.
• When connecting an external memory, these function as
the data bus.
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually
programmed as either input or output.
• When connecting an external memory, these function as
the control bus.
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually
programmed as either input or output.
• When connecting an external memory, these function as
the control bus.
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually
programmed as either input or output.
• When enabling the Master CPU bus interface function,
CMOS or TTL input level can be selected as an input.
• Key-on wake-up interrupt input pin
Function
P1
0
/AB
8
–
P1
7
/AB
15
I/O port P1
P2
0
/DB
0
–
P2
7
/DB
7
I/O port P2
P3
0
/RDY,
I/O port P3
P3
1
, P3
2
,
(See Remarks.)
P3
3
/DMA
OUT
,
P3
4
/φ
OUT
,
P3
5
/SYNC
OUT
,
P3
6
/WR,
P3
7
/RD
P4
0
/EDMA,
I/O port P4
P4
1
/INT
0
,
P4
2
/INT
1
,
P4
3
/CNTR
0
,
P4
4
/CNTR
1
P5
0
/X
CIN
,
P5
1
/T
OUT
/
X
COUT
,
P5
2
/OBF
0
,
P5
3
/IBF
0
,
P5
4
/S
0
,
P5
5
/A
0
,
P5
6
/R(E),
P5
7
/W(R/W)
I/O port P5
• External memory control pin
• External memory control pin
• External interrupt pin
• Timer X, Timer Y pin
• Sub-clock generating input pin
• Timers 1, 2 pulse output pins
• Sub-clock generating output pin
• Master CPU bus interface pin
4
P
.
ion
cat
cifi ct to
e
l sp ubje
s
fina
t a ts are
o
is n limi
his etric
e: T
otic param
N
e
Somnge.
a
ch
REL
IMIN
ARY
MITSUBISHI MICROCOMPUTERS
7641 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
Table 2 Pin description (2)
Pin
P6
0
/DQ
0
–
P6
7
/DQ
7
Name
I/O port P6
Function
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually
programmed as either input or output.
• When enabling the bus interface function, CMOS or TTL
input level can be selected as its input.
• 5-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually
programmed as either input or output.
Function except a port function
• Master CPU bus interface pin
P7
0
/SOF,
P7
1
/HOLD,
P7
2
/S
1
,
P7
3
/IBF
1
/
HLDA,
P7
4
/OBF
1
P8
0
/UTXD
2
/
SRDY,
P8
1
/URXD
2
/
SCLK,
P8
2
/CTS
2
/
SRXD,
P8
3
/RTS
2
/
STXD,
P8
4
/UTXD
1
,
P8
5
/URXD
1
,
P8
6
/CTS
1
,
P8
7
/RTS
1
I/O port P7
• USB function pin
• Master CPU bus interface pin
I/O port P8
• 8-bit I/O port.
• CMOS compatible input level.
• CMOS 3-state output structure.
• I/O direction register allows each pin to be individually pro-
grammed as either input or output.
• Serial I/O pin
• UART2 pin
• UART1 pin
Remarks
•DMA
OUT
pin
If externally detecting the timing of DMA execution, use the signal from this pin. It is “H” level during DMA transferring. This signal is valid in the memory expansion
and microprocessor modes.
•SYNC
OUT
pin
If externally detecting the timing of OP code fetch, use the signal from this pin. This signal is valid in the memory expansion and microprocessor modes.
Wearable devices involve power consumption issues such as CPU, Bluetooth, and sensors. Can you also tell me how many months of use can be achieved in actual use? What kind of specific use methods? The...
[i=s]This post was last edited by heyidisk on 2017-5-20 00:24[/i] [size=5]Every time I get something new, I want to take it apart and have a look. I wonder if anyone has the same idea as me. This time...
1. Overview
Will passive devices
produce nonlinear intermodulation distortion? The answer is yes! Although there is no systematic theoretical analysis, it has been found in engineerin...[Details]
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
1. Background:
The instrument system parameter detection and control of the chemical production workshop of Tangshan Coal Gas Coking Plant are all analog instruments, some of which are eve...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
The concept of state machine
State machine is an important concept in software programming. More important than this concept is its flexible application. In a clear and efficient program, ther...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
introduction
Incandescent bulbs can emit a variety of light, but in specific applications, only green, red, and yellow light are usually needed - such as traffic lights. If an incand...[Details]
Talking about work
京公网安备 11010802033920号
EEWORLD
