5962-0256201HYC datasheet, PDF

Datasheet> All Categories > Power/power management> The power supply circuit> 5962-0256201HYC

5962-0256201HYC: DescriptionDC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,; CategoryPower/power management The power supply circuit; File Size177KB，14 Pages; ManufacturerInfineon; Websitehttp://www.infineon.com/

Download Datasheet Parametric Compare View All

5962-0256201HYC Overview

DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,

5962-0256201HYC Parametric

Parameter Name	Attribute value
Maker	Infineon
package instruction	, MODULE,12LEAD,2.5
Reach Compliance Code	compliant
Analog Integrated Circuits - Other Types	DC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage	80 V
Minimum input voltage	30 V
Nominal input voltage	50 V
JESD-30 code	R-XDMA-P12
JESD-609 code	e4
Number of functions	1
Output times	1
Number of terminals	12
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Maximum output current	4 A
Nominal output voltage	28 V
Package body material	UNSPECIFIED
Encapsulate equivalent code	MODULE,12LEAD,2.5
Package shape	RECTANGULAR
Package form	MICROELECTRONIC ASSEMBLY
Certification status	Qualified
Filter level	MIL-PRF-38534
surface mount	NO
technology	HYBRID
Temperature level	MILITARY
Terminal surface	GOLD
Terminal form	PIN/PEG
Terminal location	DUAL
Maximum total power output	112 W
Fine-tuning/adjustable output	YES
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Update drawing to the latest requirements. -sld

Table II, add note to Group C end-point test parameters. Update

boilerplate paragraphs. -gz

Corrected dimensions for symbols D, D2, and L1 for case outline U.

Corrected dimensions for symbols D2, L, and L1 for case outline X.

Corrected dimensions for symbols D, L, and L1 for case outline Y.

Corrected dimensions for symbols D, D2, and L1 for case outline Z.

Updated drawing paragraphs. -sld

DATE (YR-MO-DA)

07-11-02

10-01-22

APPROVED

Robert M. Heber

Charles F. Saffle

13-03-05

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Steve L. Duncan

CHECKED BY

Greg Cecil

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

http://www.landandmaritime.dla.mil/

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

APPROVED BY

Raymond Monnin

DRAWING APPROVAL DATE

02-11-21

MICROCIRCUIT, HYBRID, LINEAR, 28 VOLT,

SINGLE CHANNEL, DC/DC CONVERTER

AMSC N/A

REVISION LEVEL

SIZE

SHEET

CAGE CODE

67268

1 OF

5962-02562

DSCC FORM 2233

APR 97

5962-E159-13

1.3 Absolute maximum ratings. 1/

Input voltage range ....................................................................

Lead temperature (soldering, 10 seconds) ................................

Storage temperature ..................................................................

1.4 Recommended operating conditions.

Input voltage range ....................................................................

Output power 2/ .........................................................................

Case operating temperature range (T

) .....................................

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-38534 - Hybrid Microcircuits, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 - Test Method Standard Microcircuits.

MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 - List of Standard Microcircuit Drawings.

MIL-HDBK-780 - Standard Microcircuit Drawings.

(Copies of these documents are available online at

https://assist.dla.mil/quicksearch/

or from the Standardization Document

Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item performance requirements for device classes D, E, G, H, and K shall be in

accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 shall include the performance of all tests herein or as

designated in the device manufacturer's Quality Management (QM) plan or as designated for the applicable device class. The

manufacturer may eliminate, modify or optimize the tests and inspections herein, however the performance requirements as

defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not

affect the form, fit, or function of the device for the applicable device class.

+30 V dc to +80 V dc

≤

112 W

-55°C to +125°C

-0.5 V dc to +100 V dc

+300°C

-65°C to +135°C

Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the

maximum levels may degrade performance and affect reliability.

Derate output power linearly above case temperature +125°C to 0 at +135°C.

STANDARD

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

SIZE

REVISION LEVEL

5962-02562

SHEET

DSCC FORM 2234

APR 97

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38534 and herein.

3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full specified operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking of devices. Marking of devices shall be in accordance with MIL-PRF-38534. The device shall be marked with

the PIN listed in 1.2 herein. In addition, the manufacturer's vendor similar PIN may also be marked.

3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the device described

herein shall maintain the electrical test data (variables format) from the initial quality conformance inspection group A lot sample,

for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for those

which, if any, are guaranteed. This data shall be maintained under document revision level control by the manufacturer and be

made available to the preparing activity (DLA Land and Maritime -VA) upon request.

3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this

drawing. The certificate of compliance (original copy) submitted to DLA Land and Maritime -VA shall affirm that the

manufacturer's product meets the performance requirements of MIL-PRF-38534 and herein.

3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of

microcircuits delivered to this drawing.

4. VERIFICATION

4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38534 or as

modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not affect the form,

fit, or function as described herein.

4.2 Screening. Screening shall be in accordance with MIL-PRF-38534. The following additional criteria shall apply:

Burn-in test, method 1015 of MIL-STD-883.

(1)

Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level

control and shall be made available to either DLA Land and Maritime -VA or the acquiring activity upon request.

Also, the test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance

with the intent specified in method 1015 of MIL-STD-883.

as specified in accordance with table I of method 1015 of MIL-STD-883.

(2)

Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter

tests prior to burn-in are optional at the discretion of the manufacturer.

STANDARD

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

SIZE

REVISION LEVEL

5962-02562

SHEET

DSCC FORM 2234

APR 97

5962-0256201HYC Related Products

	5962-0256201HYC	5962-0256201HXA	5962-0256201HZC	5962-0256201HZA	TSW-217-22-T-D-LA	5962-0256201HUA	5962-0256201HUC
Description	DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,	DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,	DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,	DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,	Board Connector, 34 Contact(s), 2 Row(s), Male, Right Angle, 0.2 inch Pitch, Solder Terminal, Black Insulator, Receptacle	DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,	DC-DC Regulated Power Supply Module, 1 Output, 112W, Hybrid,
Reach Compliance Code	compliant	compliant	compliant	compliant	compliant	compliant	compliant
Maximum operating temperature	125 °C	125 °C	125 °C	125 °C	105 °C	125 °C	125 °C
Minimum operating temperature	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C
Maker	Infineon	Infineon	Infineon	Infineon	-	Infineon	Infineon
package instruction	, MODULE,12LEAD,2.5	, FLANGE MT,1.5X3.0	-	, MODULE,12LEAD,2.5	-	, MODULE,12LEAD,2.5	, MODULE,12LEAD,2.5
Analog Integrated Circuits - Other Types	DC-DC REGULATED POWER SUPPLY MODULE	DC-DC REGULATED POWER SUPPLY MODULE	DC-DC REGULATED POWER SUPPLY MODULE	DC-DC REGULATED POWER SUPPLY MODULE	-	DC-DC REGULATED POWER SUPPLY MODULE	DC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage	80 V	80 V	80 V	80 V	-	80 V	80 V
Minimum input voltage	30 V	30 V	30 V	30 V	-	30 V	30 V
Nominal input voltage	50 V	50 V	50 V	50 V	-	50 V	50 V
JESD-30 code	R-XDMA-P12	R-XDMA-P12	R-XDMA-P12	R-XDMA-P12	-	R-XDMA-P12	R-XDMA-P12
JESD-609 code	e4	e0	e4	e0	-	e0	e4
Number of functions	1	1	1	1	-	1	1
Output times	1	1	1	1	-	1	1
Number of terminals	12	12	12	12	-	12	12
Maximum output current	4 A	4 A	4 A	4 A	-	4 A	4 A
Nominal output voltage	28 V	28 V	28 V	28 V	-	28 V	28 V
Package body material	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	-	UNSPECIFIED	UNSPECIFIED
Encapsulate equivalent code	MODULE,12LEAD,2.5	FLANGE MT,1.5X3.0	MODULE,12LEAD,2.5	MODULE,12LEAD,2.5	-	MODULE,12LEAD,2.5	MODULE,12LEAD,2.5
Package shape	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	-	RECTANGULAR	RECTANGULAR
Package form	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY	-	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY
Certification status	Qualified	Qualified	Qualified	Qualified	-	Qualified	Qualified
Filter level	MIL-PRF-38534	MIL-PRF-38534	MIL-PRF-38534	MIL-PRF-38534	-	MIL-PRF-38534	MIL-PRF-38534
surface mount	NO	NO	NO	NO	-	NO	NO
technology	HYBRID	HYBRID	HYBRID	HYBRID	-	HYBRID	HYBRID
Temperature level	MILITARY	MILITARY	MILITARY	MILITARY	-	MILITARY	MILITARY
Terminal surface	GOLD	TIN LEAD	GOLD	TIN LEAD	-	TIN LEAD	GOLD
Terminal form	PIN/PEG	PIN/PEG	PIN/PEG	PIN/PEG	-	PIN/PEG	PIN/PEG
Terminal location	DUAL	DUAL	DUAL	DUAL	-	DUAL	DUAL
Maximum total power output	112 W	112 W	112 W	112 W	-	112 W	112 W
Fine-tuning/adjustable output	YES	YES	YES	YES	-	YES	YES
Base Number Matches	1	1	1	1	-	1	-

Recommended Resources

Single channel infrared remote control receiving circuit

Photoelectric control motor drive circuit

Bridge push-pull amplifier circuit

Exhaust fan automatic control circuit (4)

555 game timer circuit

Two-bit temperature regulation circuit using complementary transistors

RF Critical Design Tutorial: RF Critical Design Tutorial...; xtss RF/Wirelessly

Make GPRS module intelligent and easier to embed into applications: [img]http://forum.eeworld.net/PointForum/ui/scripts/eeworld/Plugin/001/face/79.gif[/img] Make GPRS module intelligent and embed it into applications more easily. Currently, GPRS module suppliers each ...; 流氓法拉利 Embedded System

Is there a problem with the lwIP TCP client receiving data?: Use the 8962 example project enet_lwip to add a tcp client so that the MCU can connect to the tcp listener on the PC.It has been tested that it can connect to the pc normally. When connected, it sends...; tomexou Microcontroller MCU

Why do I talk so much about junk products?: (First of all, I really can't find a suitable forum for this post, but this is definitely a technical issue and is discussed from a technical perspective) People who write programs may be the same. Af...; 辛昕 Programming Basics

About MDK support unicode code: After applying MDKto execute the code char *test="Chinese characters", the content in test is the AnsiCode internal code of "Chinese characters": BABAD7D6.I hope that the content in test is the UniCod...; fu200621140 stm32/stm8

When will the war for tickets stop happening again, allowing working people to return home safely?: [font=微软雅黑][size=3]It's the Spring Festival again. Many people who are eager to go home are struggling with how to buy train tickets. Ticket grabbing software launched by major portals has emerged. I ...; kemasz Talking

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components