EEWORLDEEWORLDEEWORLD

Part Number

Search

SST55LD019M-45-I-MVWE

Description
ATA Flash Disk Controller
File Size902KB,59 Pages
ManufacturerSST
Websitehttp://www.ssti.com
Download Datasheet Compare View All

SST55LD019M-45-I-MVWE Overview

ATA Flash Disk Controller

ATA Flash Disk Controller
SST55LD019M
SST55LD019MHigh-Performance ATA Flash Disk Controller
Advance Information
FEATURES:
• Industry Standard ATA/IDE Bus Interface
– Host Interface: 8- or 16-bit access
– Supports up to PIO Mode-4
– Supports up to Multi-word DMA Mode-2
• Interface for standard NAND Flash Media
– Flash Media Interface: 8-bit or 16-bit access
- Supports up to 8 flash media devices directly
- Supports up to 64 flash media devices with
external decoding logic
– Supports Multi-Level Cell (MLC) and high
density Single-Level Cell (SLC) flash media
- 2 KByte program page size only
• Low power, 3.3V core operation
• 5.0V or 3.3V host interface through V
DDQ
pins
• Low current operation:
– Active mode: 25 mA/35 mA (3.3V/5.0V) (typical)
– Sleep mode: 40 µA/50 µA (3.3V/5.0V) (typical)
• Power Management Unit
– Immediate disabling of unused circuitry
• Expanded Data Protection
– WP_PD# pin configurable by firmware for
prevention of data overwrites
• 20-byte Unique ID for Enhanced Security
– Factory Pre-programmed 10-byte Unique ID
– User-Programmable 10-byte ID
• Integrated Voltage Detector
– Industrial Controller requires external POR# signal
• Pre-programmed Embedded Firmware
– Performs self-initialization on first system Power-on
– Executes industry standard ATA/IDE commands
– Implements dynamic wear-leveling algorithms to
substantially increase the longevity of flash media
– Embedded Flash File System
– Built-in ECC corrects up to 3 random 12-bit
symbols of error per 512-byte sector
• Internal or External System Clock Option
• Multi-tasking Technology enables Fast
Sustained Write Performance (Host to Flash)
– Up to 10MB/sec
• Fast Sustained Read Performance (Flash to Host)
– Up to 10 MB/sec
• Automatic Recognition and Initialization of
Flash Media Devices
– Seamless integration into a standard SMT
manufacturing process
– 5 sec. (typical) for flash drive recognition and
setup
• Commercial and Industrial Temperature Ranges
– 0°C to 70°C for commercial operation
– -40°C to +85°C for industrial operation
• Packages Available
– 100-lead TQFP – 16mm x 16mm
– 84-ball TFBGA – 9mm x 9mm
– 85-ball VFBGA – 6mm x 6mm
• All non-Pb (lead-free) devices are RoHS compliant
PRODUCT DESCRIPTION
SST’s ATA Flash Disk Controller is the heart of a high-
performance, flash media-based data storage system.
The ATA Flash Disk Controller recognizes the control,
address, and data signals on the ATA/IDE bus and trans-
lates them into memory accesses to the standard NAND-
type flash media. The SST55LD019M device supports
Multi-Level Cell (MLC) and high density Single-Level
Cell (SLC) flash media. This technology suits solid state
mass storage applications offering new, expanded func-
tionality while enabling smaller, lighter designs with lower
power consumption.
The ATA/IDE interface is widely used in such products as
portable and desktop computers, digital cameras, music
players, handheld data collection scanners, PDAs, handy
terminals, personal communicators, audio recorders, moni-
toring devices, and set-top boxes. SST’s ATA Flash Disk
Controller supports standard ATA/IDE protocol with up to
PIO Mode-4 and Multi-word DMA Mode-2 interface.
©2005 Silicon Storage Technology, Inc.
S71312-01-000
12/06
1
Utilizing SST’s proprietary SuperFlash memory technology,
the ATA Flash Disk Controller is factory pre-programmed
with an embedded flash file system which, upon initial
Power-on, recognizes the attached flash media devices,
sets up a bad block table, executes all necessary hand-
shaking routines for flash media support, and, finally, per-
forms the low-level format. This process typically takes
about 3 sec + 0.5 sec/GByte of drive capacity, allowing a
2 GByte flash drive to be fully initialized in about 4 seconds.
This technology enables a very fast, completely seam-
less integration of flash drives into an embedded design.
For added manufacturing flexibility, system debug, re-ini-
tialization, and user customization can be accomplished
either through the ATA/IDE interface, for ATA Disk Module
or flash drive products, or through the Serial Communi-
cation Interface (SCI), for fully embedded ATA Flash Disk
Controller designs.
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. Some content is reproduced from the CompactFlash
Specification (2.0) by permission of the CompactFlash Association. Other content is reproduced from the ATA/ATAPI-6 (T13/1410D revision 3b) spec-
ification by permission of the National Committee for Information Technology Standards. These specifications are subject to change without notice.

SST55LD019M-45-I-MVWE Related Products

SST55LD019M-45-I-MVWE SST55LD019M-45-I-TQWE SST55LD019M-45-I-BWE SST55LD019M-45-C-TQWE SST55LD019M-45-C-MVWE SST55LD019M-45-C-BWE SST55LD019M
Description ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller
Tantalum capacitor identification, what does the F in 106F stand for
As the title says, thanks for your reply!!...
mfhsu Discrete Device
Does anyone know how to measure the maximum power withstand?
Recently, I am learning to make an antenna. After finishing it, I saw the so-called maximum power of the antenna in the specification table. Can you ask the experts whether this value is measured or c...
satrune40 RF/Wirelessly
Beyond Your Imagination—USB Logic Analyzer Comparison
Logic analyzers were once considered expensive instruments, with large size, thick manuals, and complicated operations, which made engineers not allowed to own them easily. Today, a small box can tran...
giga Embedded System
【CN0107】Design of electronic scale using AD7780 24-bit Σ-Δ ADC with built-in PGA
This circuit is a weigh scale system built using the AD7780. The AD7780 is a pin-programmable, low power, low drift, 24-bit Σ-Δ ADC with built-in PGA and internal clock. The device simplifiesweigh sca...
EEWORLD社区 ADI Reference Circuit
I'm looking for an expert online to help me with the SPI issue of the PIC16F1823 microcontroller! ! ! !
[table=98%] [tr][td][table=98%] [tr][td]I'm in urgent need of help from an expert. Regarding the SPI problem of PIC16F1823, after receiving the command, the slave makes the I/O pin RA5 become high lev...
mowalking Microchip MCU
Software and hardware serial communication
I connected a device with Advantech's 4521 and 4520 (modules for converting 485 and 232 signals) modules, hoping to read the device from a computer. I used a serial port debugging tool to debug. If th...
ryzhou Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1080  2095  1843  943  320  22  43  38  19  7 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号