EEWORLDEEWORLDEEWORLD

Part Number

Search

SST55LD019M-45-I-TQWE

Description
ATA Flash Disk Controller
File Size902KB,59 Pages
ManufacturerSST
Websitehttp://www.ssti.com
Download Datasheet Compare View All

SST55LD019M-45-I-TQWE Overview

ATA Flash Disk Controller

ATA Flash Disk Controller
SST55LD019M
SST55LD019MHigh-Performance ATA Flash Disk Controller
Advance Information
FEATURES:
• Industry Standard ATA/IDE Bus Interface
– Host Interface: 8- or 16-bit access
– Supports up to PIO Mode-4
– Supports up to Multi-word DMA Mode-2
• Interface for standard NAND Flash Media
– Flash Media Interface: 8-bit or 16-bit access
- Supports up to 8 flash media devices directly
- Supports up to 64 flash media devices with
external decoding logic
– Supports Multi-Level Cell (MLC) and high
density Single-Level Cell (SLC) flash media
- 2 KByte program page size only
• Low power, 3.3V core operation
• 5.0V or 3.3V host interface through V
DDQ
pins
• Low current operation:
– Active mode: 25 mA/35 mA (3.3V/5.0V) (typical)
– Sleep mode: 40 µA/50 µA (3.3V/5.0V) (typical)
• Power Management Unit
– Immediate disabling of unused circuitry
• Expanded Data Protection
– WP_PD# pin configurable by firmware for
prevention of data overwrites
• 20-byte Unique ID for Enhanced Security
– Factory Pre-programmed 10-byte Unique ID
– User-Programmable 10-byte ID
• Integrated Voltage Detector
– Industrial Controller requires external POR# signal
• Pre-programmed Embedded Firmware
– Performs self-initialization on first system Power-on
– Executes industry standard ATA/IDE commands
– Implements dynamic wear-leveling algorithms to
substantially increase the longevity of flash media
– Embedded Flash File System
– Built-in ECC corrects up to 3 random 12-bit
symbols of error per 512-byte sector
• Internal or External System Clock Option
• Multi-tasking Technology enables Fast
Sustained Write Performance (Host to Flash)
– Up to 10MB/sec
• Fast Sustained Read Performance (Flash to Host)
– Up to 10 MB/sec
• Automatic Recognition and Initialization of
Flash Media Devices
– Seamless integration into a standard SMT
manufacturing process
– 5 sec. (typical) for flash drive recognition and
setup
• Commercial and Industrial Temperature Ranges
– 0°C to 70°C for commercial operation
– -40°C to +85°C for industrial operation
• Packages Available
– 100-lead TQFP – 16mm x 16mm
– 84-ball TFBGA – 9mm x 9mm
– 85-ball VFBGA – 6mm x 6mm
• All non-Pb (lead-free) devices are RoHS compliant
PRODUCT DESCRIPTION
SST’s ATA Flash Disk Controller is the heart of a high-
performance, flash media-based data storage system.
The ATA Flash Disk Controller recognizes the control,
address, and data signals on the ATA/IDE bus and trans-
lates them into memory accesses to the standard NAND-
type flash media. The SST55LD019M device supports
Multi-Level Cell (MLC) and high density Single-Level
Cell (SLC) flash media. This technology suits solid state
mass storage applications offering new, expanded func-
tionality while enabling smaller, lighter designs with lower
power consumption.
The ATA/IDE interface is widely used in such products as
portable and desktop computers, digital cameras, music
players, handheld data collection scanners, PDAs, handy
terminals, personal communicators, audio recorders, moni-
toring devices, and set-top boxes. SST’s ATA Flash Disk
Controller supports standard ATA/IDE protocol with up to
PIO Mode-4 and Multi-word DMA Mode-2 interface.
©2005 Silicon Storage Technology, Inc.
S71312-01-000
12/06
1
Utilizing SST’s proprietary SuperFlash memory technology,
the ATA Flash Disk Controller is factory pre-programmed
with an embedded flash file system which, upon initial
Power-on, recognizes the attached flash media devices,
sets up a bad block table, executes all necessary hand-
shaking routines for flash media support, and, finally, per-
forms the low-level format. This process typically takes
about 3 sec + 0.5 sec/GByte of drive capacity, allowing a
2 GByte flash drive to be fully initialized in about 4 seconds.
This technology enables a very fast, completely seam-
less integration of flash drives into an embedded design.
For added manufacturing flexibility, system debug, re-ini-
tialization, and user customization can be accomplished
either through the ATA/IDE interface, for ATA Disk Module
or flash drive products, or through the Serial Communi-
cation Interface (SCI), for fully embedded ATA Flash Disk
Controller designs.
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. Some content is reproduced from the CompactFlash
Specification (2.0) by permission of the CompactFlash Association. Other content is reproduced from the ATA/ATAPI-6 (T13/1410D revision 3b) spec-
ification by permission of the National Committee for Information Technology Standards. These specifications are subject to change without notice.

SST55LD019M-45-I-TQWE Related Products

SST55LD019M-45-I-TQWE SST55LD019M-45-I-MVWE SST55LD019M-45-I-BWE SST55LD019M-45-C-TQWE SST55LD019M-45-C-MVWE SST55LD019M-45-C-BWE SST55LD019M
Description ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller ATA Flash Disk Controller
How to prevent a thread from being preempted in Linux
Is there any way to prevent certain code segments of a thread from being preempted under the Linux system, just like the EnterCritical function on the microcontroller RTOS?...
汤权 Embedded System
Award-winning live broadcast: Focus on "TI FPD-Link III automotive chipset" Ideal solution for automotive video transmission
Live broadcast time: 10:00-11:30 am, September 24, 2019 (Tuesday)Live broadcast topic: TI FPD-Link III automotive chipset, an ideal solution for automotive video transmission Live broadcast content: A...
EEWORLD社区 Automotive Electronics
N-channel depletion MOS tube
[table=98%] [tr][td][p=24, null, left][size=3][color=#000000][backcolor=white]From a structural point of view, the N-channel depletion-type MOS tube is basically similar to the N-channel enhancement-t...
qinkaiabc Analog electronics
Playing with Zynq Serial 1——Zynq Linux boot process
1 OverviewSimply speaking, from a picture in ug585 , the startup of Linux in Zynq can be divided into hardware initialization and software startup. Hardware initialization includes power-on ( POR ), r...
ove学习使我快乐 FPGA/CPLD
The mobile communication era has arrived, and there is a serious shortage of 3G talents!!!
With the advent of the 3G era, there is a serious shortage of talents who can integrate software development and mobile communication technology. Qiongyu Vocational Skills Training School has joined h...
13802373669 Embedded System
Three major trends in DSL technology
Although DSL technology can transmit voice and broadband data services on a twisted pair, it can only provide one voice channel and cannot realize voice and data transmission simultaneously in DSL. If...
songbo RF/Wirelessly

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2145  2838  890  2614  2678  44  58  18  53  54 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号