To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSA66 Low-Voltage UHS Single SPST Normally Open Analog Switch
June 2006
FSA66
Low-Voltage UHS Single SPST
Normally Open Analog Switch
Features
■
Space-saving SOT23 or SC70 5-lead package
■
Ultra small MicroPak™ leadless package
■
Broad V
CC
operating range: 1.65V–5.5V
■
Rail-to-rail signal handling
■
5Ω switch connection between two ports
■
Minimal propagation delay through the switch
■
Low I
CC
■
Zero bounce in flow-through mode
■
Control input compatible with CMOS input levels
■
>250 MHz –3dB bandwidth
General Description
The FSA66 is a ultra high-speed (UHS) CMOS compati-
ble Single-Pole/Single-Throw (SPST) analog switch. The
low On Resistance (R
ON
) of the switch allows input to be
connected to output with minimal propagation delay and
without generating additional ground bounce noise. The
device is organized as a 1-bit switch with a switch enable
(OE) signal. When OE is HIGH, the switch is on and Port
A is connected to Port B. When OE is LOW, the switch is
open and a high-impedance state exists between the two
ports.
Ordering Information
Order
Number
FSA66M5X
FSA66P5X
FSA66L6X
Product
Package
Code
Number PB-Free Top Mark
MA05B
MAA05A
MAC06
Yes
Yes
Yes
7Z66
Z66
EE
Package Description
5-Lead SOT23, JEDEC MO-178,
1.6mm
Packing Method
3k Units on Tape and Reel
5-Lead SC70, EIAJ SC-88a, 1.25mm 3k Units on Tape and Reel
Wide
6-Lead MicroPak, 1.0mm Wide
5k Units on Tape and Reel
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
As the moderator, I would like to start a topic about MCU training. I would like to organize the information including hardware schematics, programs and documentation according to the characteristics ...
One issue that can cause higher than expected current consumption is turning on the input. To prevent turning on the input, use one of the following solutions for unused I/O pins:Switch unused I/Os to...
I received the C2000 28035 development board from TI today. I want to ask what are the specific advantages of C2000 over ARM. I feel that the resources of 28035 are not as good as those of M3 ARM, and...
[i=s]This post was last edited by Aguilera on 2019-9-3 22:27[/i]ARM: How to analyze a DAbt exceptionThis article is for:Any version of ARMProblem:My ARM application does not work. When I run it in a s...
1. How to use LPM mode? ? The sheet says that it involves four bits in SR: SCG0, SCG1, CPuOFF, OSCOFF.But there are only five LPM combinations. Can we only operate according to the five listed in the ...
[i=s]This post was last edited by aq1261101415 on 2020-9-24 18:50[/i]Q2 Why does the MOS tube get hot and damaged? Is it because there is no freewheeling diode in the motor? However, I cannot find a f...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
introduction
Since the beginning of the 21st century, the world of information has changed rapidly. Maybe a high-tech product will be released today and a better similar product will be releas...[Details]
Do you often have to add brake fluid to your car's brakes? The fact that you need to pump out the brake fluid to make sure there is no gas in the brake fluid line may not be done by the car owner h...[Details]
For a long time, due to the limitation of hardware conditions, the display devices of traditional small handheld devices such as PDA are usually monochrome LCD, and the user interface is very simpl...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
VP2188 is a color STN LCD module produced by Jingdian Pengyuan. This module is a dot matrix transmissive color STN display screen with a color scale of 65 k colors and white LED backlight. Its core...[Details]
OC faults may be the most frequent and the most frequent of all faults in the inverter. They alarm during the startup process, during the shutdown process, during operation, and even when powered o...[Details]
Preface
In recent years, white light LEDs have gradually replaced incandescent bulbs and fluorescent lamps because they have unparalleled advantages over traditional light sources in terms...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
0 Introduction
High-precision current source can provide high-precision current supply for precision instruments, and is suitable for automatic measurement tasks of various resistors in semico...[Details]
0 Introduction
With the rapid development of social economy and science and technology, electric locomotives, subways and electric vehicles will be widely used. The power conversion and cont...[Details]
Abstract: In order to realize wireless automatic alarm and monitoring of major safety places, based on the basic principle of pyroelectric infrared sensing, a detector for receiving infrared radia...[Details]
introduction
LEDs continue to gain popularity in automotive applications, thanks to their long lifespan and the flexibility they offer for body styling and interior design. Some may be surpris...[Details]
1. Tips for charging UPS for the first time
After purchasing a new UPS, plug the UPS into the 220V mains power grid and charge it for at least 12 hours to ensure that the battery is fully char...[Details]
Direct digital frequency synthesis (DDS) has fast frequency switching and modulation capabilities and is widely used. However, when low power consumption and low cost are the main considerations, D...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
