100mA/50V Digital transistors(with built-in resistors)
DTC014EM / DTC014EEB / DTC014EUB
Features
1) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external input resistors.
(See equivalent circuit)
2) The bias resistors consist of thin-film resistors with complete
isolation to allow negative biasing of the input.
They also have the advantage of almost completely
eliminating parasitic effects.
3) Only the on/off conditions need to be set for operation,
making the device design easy.
Dimensions
(Unit : mm)
VMT3
Abbreviated symbol : 40
EMT3F
(3)
Structure
NPN epitaxial planar silicon transistor
(Resistor built-in type)
UMT3F
(1)
(2)
Abbreviated symbol : 40
1.25
2.1
Applications
Inverter, Interface, Driver
0.32
2.0
0.9
0.53
0.425
(3)
(1)
0.65 0.65
1.3
(2)
0.13
Abbreviated symbol : 40
Packaging
specifications
Package
Packaging Type
Type
Code
Basic ordering
unit (pieces)
DTC014EM
DTC014EEB
DTC014EUB
Equivalent
circuit
VMT3
Taping
T2L
8000
○
-
-
EMT3F
Taping
TL
3000
-
○
-
UMT3F
Taping
TL
3000
-
-
○
IN
R
1
IN
R
2
GND
OUT
OUT
GND
R
1
=R
2
=10kΩ
Absolute
maximum
(Ta=25C)
Parameter
Supply voltage
Input voltage
Collector current *1
Output current
Power dissipation *2
Junction temperature
Range of storage temperature
*1 Characteristics of built-in transistor
*2 Each terminal mounted on a reference land
Symbol
V
CC
V
IN
I
C(max)
I
O
P
D
Tj
Tstg
M
Limits(DTC014E□)
EB
UB
50
40
-10
100
50
150
150
-55 to +150
200
Unit
V
V
V
mA
mA
mW
℃
℃
www.rohm.com
©2011 ROHM Co., Ltd. All rights reserved.
1/2
2011.08 - Rev.A
0.53
0.425
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
R1120A
Robotics Development
京公网安备 11010802033920号
EEWORLD
