.050” Surface Mount Right Angle Die-Cast Receptacle – Shielded
102 Series
• Rugged die-cast body resists tipping during automated
soldering operations
• Wiper-on-wiper contact for reliable repetitive plugging
• Ultra-low signal skew for high data rate transmission
• Interface latch design for connection stability
• Suitable for thumbscrew attach (see TS-0142 for
available hardware)
• MDR digital LCD interface as a 20 or 26 contact
connector
• Camera Link
®
interface as a 26 contact connector
• Contacts: 14, 20, 26, 40 and 50
•
See the Regulatory Information Appendix (RIA) in the
“RoHS compliance” section of www.3mconnector.com
for compliance information
Date Modified: October 27, 2010
TS‑2242‑B
Sheet 1 of 3
Physical
Body Material:
Flammability:
Alignment Plate Material:
Flammability:
Contact Material:
Underplating:
Wiping Area Plating:
Solder Tail Plating:
Shroud Material:
Plating:
Lock Stand Material:
Plating:
Glass Reinforced Polyester (PCT), Natural Color
UL 94V-0
LCP, Natural Color
UL 94V-0
Copper Alloy
80 µ” [2 µm] Nickel
See Ordering Information
Flash Gold over Nickel (RIA E1 & C1 apply)
Steel
Nickel
Zinc Alloy
Nickel
Electrical
Current Rating:
1 A
Insulation Resistance:
>5 x 10
8
Ω
at 500 V
DC
Withstanding Voltage:
500 V
rms
for 1 minute
Environmental
Temperature Rating:
-55 °C to +85 °C
Process Rating:
240°C- 250°C peak temperature for less than 10 secs., 220°C soldering for 30 – 60 secs. after
150°C - 180°C preheat for 90 –120 secs. (reflow two times)
UL File No.: E68080
3
Interconnect Solutions
http://www.3Mconnector.com
Camera Link
®
is a trademark of Automated Imaging Assocition
3M is a trademark of the 3M Company
For technical, sales or ordering information call
800-225-5373
3M
™
Mini D Ribbon (MDR) Connectors
.050” Surface Mount Right Angle Die-Cast Receptacle — Shielded
DIM. A
DIM. B
DIM. C
0.635
[.025]
M2.5
0.25
[.010]
T
TAIL COPLANARITY
0.00 TO 0.10
9.35
[.368]
9.1
[.36]
MARK PIN
MARK PIN
102 Series
1.20
[.047]
11.5
[.45]
2.9
[.11]
16.7
[.66]
4.8
[.19]
3.5
[.14]
DIM. D
DIM. E
T
7.2
[.28]
T-T
15°
9.1
[.36]
0.3
[.01]
N
1.9
[.07]
FLAT FIXTURE
SURFACE
MARK PIN
1.27±0.10
[.050±0.004]
DETAIL-N
DIM. G
DIM. H
Contact
Quantity
14
20
26
40
50
DIM A
29.5
(1.16)
33.3
(1.31)
37.2
(1.46)
46.1
(1.81)
52.4
(2.06)
DIM B
23.64
(.931)
27.45
(1.081)
31.26
(1.231)
40.15
(1.581)
46.50
(1.831)
DIM C
8.255
(.325)
12.065
(.475)
15.875
(.625)
24.765
(.975)
31.115
(1.225)
DIM D
17.1
(.67)
21.0
(.83)
24.8
(.98)
33.7
(1.33)
40.0
(1.57)
DIM E
19.5
(.77)
23.4
(.92)
27.2
(1.07)
36.1
(1.42)
42.4
(1.67)
DIM F
12.6
(.50)
16.4
(.65)
20.2
(.80)
29.1
(1.15)
35.5
(1.40)
DIM G
7.62
(.300)
11.43
(.450)
15.24
(.600)
24.13
(.950)
30.48
(1.200)
DIM H
12.70
(.500)
16.51
(.650)
20.32
(.800)
29.21
(1.150)
35.56
(1.400)
0.00 TO 0.10
[.000 TO .004]
M2.5
4.8
[.19]
DIM. F
MARK PIN
2.8
[.11]
6.3
[.25]
4.75
[.187]
10.0
[.39]
mm
(inch)
Tolerance Unless Noted
.0
mm
±.3
.00
±.15
.000
±.150
( ) Dimensions used for
Reference Only
TS‑2242‑B
Sheet 2 of 3
Ordering Information
Contact Quantity
See Table
102XX-1S10 PX
Wiping Area Plating:
L = 8 µ” min. Gold with Lubricant Treatment
E = 20 µ” min. Gold
3
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of the 3M Company
For technical, sales or ordering information call
800-225-5373
3M
™
Mini D Ribbon (MDR) Connectors
.050” Surface Mount Right Angle Die-Cast Receptacle — Shielded
7.24
[.285]
Ø2.80+0.10
-0.00
Ø.110+.004
-.000
2.2225 REF
[.0875]
102 Series
6.74
[.265]
3.84±0.10
[.151±.004]
3.00
[.118]
4.75
[.187]
2.00
[.079]
[
]
MARK PIN
MARK PIN
1.00
[.039]
0.400±0.02
[.016±.001]
0.635±0.02
[.025±.001]
4.20
[.165]
DIM. K
DIM. M
DIM. L
DIM. J
[
Ø2.00+0.10
-0.00
Ø.079+.004
-.000
]
EDGE OF PWB
PATTERN
PROHIBITION AREA
"LOCK STAND"
MOUNTING AREA
ONLY SOLDER PAD
0.50 TYP
[.020]
7.20±0.15
[.283±.006]
2.90 REF
[.114]
12.00
[.47]
4.94 REF
[.195]
7.84±0.15
[.309±.006]
R1.50
[R.059]
DIM. P
DIM. N
8.10±0.1
[.319±.004]
Recommended Board Layout
Viewed from Connector Side
Recommended Panel Cutout
Panel Thickness: 2.0 mm (.08 inch) Max.
Contact
Quantity
14
20
26
40
50
DIM J
29.5
(1.16)
33.3
(1.31)
37.2
(1.46)
46.1
(1.81)
52.4
(2.06)
DIM K
23.64
(.931)
27.45
(1.081)
31.26
(1.231)
40.15
(1.581)
46.50
(1.831)
DIM L
12.70
(.500)
16.51
(.650)
20.32
(.800)
29.21
(1.150)
35.56
(1.400)
DIM M
8.255
(.325)
12.065
(.475)
15.875
(.625)
24.765
(.975)
31.115
(1.225)
DIM N
19.9
(.78)
23.8
(.94)
27.6
(1.09)
36.5
(1.44)
42.8
(1.69)
DIM P
23.64 .13
(.931)
27.45 .13
(1.081)
31.26 .13
(1.231)
40.15 .13
(1.581)
46.50 .13
(1.831)
mm
(inch)
Tolerance Unless Noted
.0
mm
±.3
.00
±.05
.000
±.050
( ) Dimensions used for
Reference Only
Note: The connector should be mounted to the panel and printed circuit board with screws. See TS-0142 for mounting hardware.
TS‑2242‑B
Sheet 3 of 3
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of the 3M Company
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
How to implement PID control of psoc3? 0-10V output speed control and 1-way speed detection form a closed loop control. Can anyone with ideas help me answer this?...
I would like to ask you, what should I pay attention to when using the function in F021? Why, when I execute this function and erase a sector, it will cause the chip to reset? 85)][font="][size=14px]P...
A big reward: I want to design a host computer software for 51 single-chip microcomputer, preferably using C programming. Those who are interested can contact me via email [url=mailto:389721224@qq,com...
I'm asking about the mouse, not the keyboard. I don't know what the implementation principle is? Is there a controller integrated in the 2410, core version or development board? Thank you!! ~...
The user inputs M and N values, and the program starts counting from 1 to N in a loop. Each time the number reaches M, the value is output until all the values are output. Write a C program. Use a cir...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
The invention of the steam engine ushered in the first conversion of internal energy and mechanical energy for mankind, and the birth of the internal combustion engine at the end of the 19th centur...[Details]
The future energy storage hotspot is not coal or iron ore, but lithium. This lightest metal in nature may be the heaviest resource in the future energy landscape. China launched an ambitious electr...[Details]
In industry, voltage 0…5 (10) V or current 0 (4)…20 mA is usually used as a method for analog signal transmission, which is also a method often used by programmable controllers. So what are the dif...[Details]
The overall operating performance of an electric car depends first on its battery system and motor drive system. The drive system of an electric car is generally composed of three main parts: a con...[Details]
Button cells (also called button cells) are those batteries with equal or larger diameter and height. The current size range of alkaline button cells is specified as follows: diameter 4.8mm-11.4mm,...[Details]
Since the emergence of electronic system noise reduction technology in the mid-1970s, the Federal Communications Commission of the United States in 1990 and the European Union in 1992 proposed regu...[Details]
At present, the DES algorithm is increasingly used in confidential communications in the financial and non-financial sectors. DES (Data Encryption Standard) is a data encryption algorithm that was suc...[Details]
Thyristor is the abbreviation of thyristor, commonly known as silicon controlled rectifier. It is a high-power switching semiconductor device, represented by the letter symbols "V" or "VT" in the c...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
