.050” Surface Mount Right Angle Die-Cast Receptacle – Shielded
102 Series
• Rugged die-cast body resists tipping during automated
soldering operations
• Wiper-on-wiper contact for reliable repetitive plugging
• Ultra-low signal skew for high data rate transmission
• Interface latch design for connection stability
• Suitable for thumbscrew attach (see TS-0142 for
available hardware)
• MDR digital LCD interface as a 20 or 26 contact
connector
• Camera Link
®
interface as a 26 contact connector
• Contacts: 14, 20, 26, 40 and 50
•
See the Regulatory Information Appendix (RIA) in the
“RoHS compliance” section of www.3mconnector.com
for compliance information
Date Modified: October 27, 2010
TS‑2242‑B
Sheet 1 of 3
Physical
Body Material:
Flammability:
Alignment Plate Material:
Flammability:
Contact Material:
Underplating:
Wiping Area Plating:
Solder Tail Plating:
Shroud Material:
Plating:
Lock Stand Material:
Plating:
Glass Reinforced Polyester (PCT), Natural Color
UL 94V-0
LCP, Natural Color
UL 94V-0
Copper Alloy
80 µ” [2 µm] Nickel
See Ordering Information
Flash Gold over Nickel (RIA E1 & C1 apply)
Steel
Nickel
Zinc Alloy
Nickel
Electrical
Current Rating:
1 A
Insulation Resistance:
>5 x 10
8
Ω
at 500 V
DC
Withstanding Voltage:
500 V
rms
for 1 minute
Environmental
Temperature Rating:
-55 °C to +85 °C
Process Rating:
240°C- 250°C peak temperature for less than 10 secs., 220°C soldering for 30 – 60 secs. after
150°C - 180°C preheat for 90 –120 secs. (reflow two times)
UL File No.: E68080
3
Interconnect Solutions
http://www.3Mconnector.com
Camera Link
®
is a trademark of Automated Imaging Assocition
3M is a trademark of the 3M Company
For technical, sales or ordering information call
800-225-5373
3M
™
Mini D Ribbon (MDR) Connectors
.050” Surface Mount Right Angle Die-Cast Receptacle — Shielded
DIM. A
DIM. B
DIM. C
0.635
[.025]
M2.5
0.25
[.010]
T
TAIL COPLANARITY
0.00 TO 0.10
9.35
[.368]
9.1
[.36]
MARK PIN
MARK PIN
102 Series
1.20
[.047]
11.5
[.45]
2.9
[.11]
16.7
[.66]
4.8
[.19]
3.5
[.14]
DIM. D
DIM. E
T
7.2
[.28]
T-T
15°
9.1
[.36]
0.3
[.01]
N
1.9
[.07]
FLAT FIXTURE
SURFACE
MARK PIN
1.27±0.10
[.050±0.004]
DETAIL-N
DIM. G
DIM. H
Contact
Quantity
14
20
26
40
50
DIM A
29.5
(1.16)
33.3
(1.31)
37.2
(1.46)
46.1
(1.81)
52.4
(2.06)
DIM B
23.64
(.931)
27.45
(1.081)
31.26
(1.231)
40.15
(1.581)
46.50
(1.831)
DIM C
8.255
(.325)
12.065
(.475)
15.875
(.625)
24.765
(.975)
31.115
(1.225)
DIM D
17.1
(.67)
21.0
(.83)
24.8
(.98)
33.7
(1.33)
40.0
(1.57)
DIM E
19.5
(.77)
23.4
(.92)
27.2
(1.07)
36.1
(1.42)
42.4
(1.67)
DIM F
12.6
(.50)
16.4
(.65)
20.2
(.80)
29.1
(1.15)
35.5
(1.40)
DIM G
7.62
(.300)
11.43
(.450)
15.24
(.600)
24.13
(.950)
30.48
(1.200)
DIM H
12.70
(.500)
16.51
(.650)
20.32
(.800)
29.21
(1.150)
35.56
(1.400)
0.00 TO 0.10
[.000 TO .004]
M2.5
4.8
[.19]
DIM. F
MARK PIN
2.8
[.11]
6.3
[.25]
4.75
[.187]
10.0
[.39]
mm
(inch)
Tolerance Unless Noted
.0
mm
±.3
.00
±.15
.000
±.150
( ) Dimensions used for
Reference Only
TS‑2242‑B
Sheet 2 of 3
Ordering Information
Contact Quantity
See Table
102XX-1S10 PX
Wiping Area Plating:
L = 8 µ” min. Gold with Lubricant Treatment
E = 20 µ” min. Gold
3
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of the 3M Company
For technical, sales or ordering information call
800-225-5373
3M
™
Mini D Ribbon (MDR) Connectors
.050” Surface Mount Right Angle Die-Cast Receptacle — Shielded
7.24
[.285]
Ø2.80+0.10
-0.00
Ø.110+.004
-.000
2.2225 REF
[.0875]
102 Series
6.74
[.265]
3.84±0.10
[.151±.004]
3.00
[.118]
4.75
[.187]
2.00
[.079]
[
]
MARK PIN
MARK PIN
1.00
[.039]
0.400±0.02
[.016±.001]
0.635±0.02
[.025±.001]
4.20
[.165]
DIM. K
DIM. M
DIM. L
DIM. J
[
Ø2.00+0.10
-0.00
Ø.079+.004
-.000
]
EDGE OF PWB
PATTERN
PROHIBITION AREA
"LOCK STAND"
MOUNTING AREA
ONLY SOLDER PAD
0.50 TYP
[.020]
7.20±0.15
[.283±.006]
2.90 REF
[.114]
12.00
[.47]
4.94 REF
[.195]
7.84±0.15
[.309±.006]
R1.50
[R.059]
DIM. P
DIM. N
8.10±0.1
[.319±.004]
Recommended Board Layout
Viewed from Connector Side
Recommended Panel Cutout
Panel Thickness: 2.0 mm (.08 inch) Max.
Contact
Quantity
14
20
26
40
50
DIM J
29.5
(1.16)
33.3
(1.31)
37.2
(1.46)
46.1
(1.81)
52.4
(2.06)
DIM K
23.64
(.931)
27.45
(1.081)
31.26
(1.231)
40.15
(1.581)
46.50
(1.831)
DIM L
12.70
(.500)
16.51
(.650)
20.32
(.800)
29.21
(1.150)
35.56
(1.400)
DIM M
8.255
(.325)
12.065
(.475)
15.875
(.625)
24.765
(.975)
31.115
(1.225)
DIM N
19.9
(.78)
23.8
(.94)
27.6
(1.09)
36.5
(1.44)
42.8
(1.69)
DIM P
23.64 .13
(.931)
27.45 .13
(1.081)
31.26 .13
(1.231)
40.15 .13
(1.581)
46.50 .13
(1.831)
mm
(inch)
Tolerance Unless Noted
.0
mm
±.3
.00
±.05
.000
±.050
( ) Dimensions used for
Reference Only
Note: The connector should be mounted to the panel and printed circuit board with screws. See TS-0142 for mounting hardware.
TS‑2242‑B
Sheet 3 of 3
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of the 3M Company
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
[i=s]This post was last edited by dontium on 2015-1-23 12:56[/i]The chip I use is tlv5618.Question: The input power supply is 5V and the reference voltage is 3V. According to the data, the output volt...
We invite STM32 technical personnel to work part-time. Whether you are an expert or a beginner, there are suitable opportunities. Please read on. For technical experts, we promise: 1. As long as you d...
u8 InvertByte(u8 b){ _U8 tmpA=b; //Protect the data source, try not to operate b directly. It will be abnormal under keil u8 tmpB=0x00; u8 shifter1=0x01; u8 shifter2=0x80; do{ if((tmpA&shifter1)==shif...
Project IntroductionThe hardware environment of this project: Neptune (W800) development board, yellow and white two-color light board, dimming driver board, 12V switching power supply.The driver boar...
【1】PCB layout engineer : Job responsibilities: 1. Responsible for the design of the company's product hardware schematics , PCB layout, Layout and other PCB board-level work; 2. Responsible for the es...
When the WDP500-2A plane grating monochromator is used to test the emission wavelength of a high-power laser diode at different currents, the matching of the laser diode has the disadvantages of lo...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
0 Introduction
With the rise and continuous improvement of the solid-state lighting industry, light-emitting diodes (LEDs) have become an alternative lighting technology and are gr...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
Nippon Electric Works and Volvo Technology Japan have developed a wireless power supply system for electric vehicles (EVs). Using this system, the two companies have successfully conducted an exper...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
introduction
Incandescent bulbs can emit a variety of light, but in specific applications, only green, red, and yellow light are usually needed - such as traffic lights. If an incand...[Details]
0 Introduction
Ultrasonic waves
are mechanical waves with a frequency of more than 20KHz, and the propagation speed in the air is about 340 m/s (at 20°C). Ultrasonic waves can be gene...[Details]
0 Introduction
Wireless Sensor Network (WSN) monitors the target by deploying a large number of sensor nodes in the target area. WSN realizes the positioning and tracking of the target, determi...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
Among the uses of electrical energy, lighting accounts for a considerable proportion. Compared with the earlier ordinary incandescent lamps, the fluorescent lamps and energy-saving lamps we commonl...[Details]
Movpower is a portable power bank. It can charge most mobile phones and digital products, such as digital cameras, PDAs, and mobile phones such as Apple, iPod, Blackberry, Motorola, Samsung, Nokia,...[Details]
summary
This article will briefly analyze the success and shortcomings of high-frequency DC-DC switching power supplies in the process of miniaturization (the second basic goal), and propose m...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
