3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm High Speed Digital Data Transmission, 26 position
1MG26-LFW0-00C-XXX
• Supports new AIA Industrial Camera Link®
Standard for new Mini C/L camera to C/L
frame grabber applications
• 11 shielded, twisted twinax pairs with four
drain wires
• Double overall shield with inner foil and
outer braid
• Rugged ribbon contact type
• EMI shielded cable assembly
• For use as bulkhead feed through or
extension cable
• See regulatory information appendix (RIA)
for chemical compliance information
Date Modified: December 10, 2007
TS-2128-C
Sheet 1 of 3
Physical
Connector Contact Plating:
Wiping Area: 30
μ″
[ 0.76
μm
] Min Gold
Underplating: 100
μ″
[ 2.55
μm
] Nickel
Shell Options:
Color:
Material:
Cable:
Color:
Jacket Material:
Flammability:
Marking:
Silver ( MDR), Black (SDR)
Polyvinyl Chloride (SDR) Metal Plated Polyester Elastomer (MDR)
Beige
Polyvinyl Chloride (PVC)
AWM VW-1
3M Logo
Electrical
Voltage Rating:
30 V
Current Rating:
0.5 A
Insulation Resistance:
1 × 10
8
Ω
min at 100 V
DC
Withstanding Voltage:
125 V
AC
RMS for 1 minute
Environmental
Temperature Rating:
0°C to +70°C
UL File No.: E86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
Camera Link is a certification mark of Automated Imaging Association.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm High Speed Digital Data Transmission, 26 position
1MG26-LFW0-00C-XXX
High Density MDR
Female Receptacle
26 Position
LENGTH
(See ordering information)
Cable
(See pinout for cable construction)
High Density SDR
Male Plug
26 Position
2X M2.0 Thumbscrew
41.0
1.6
32.0
1.26
Figure 1
MDR Receptacle To SDR Plug Bulkhead Cable Assembly
24.4
0.96
1 2 3 4 5 6 7 8 9 10 11 12 13
9.0
0.35
14 15 16 17 18 19 20 21 22 23 24 25 26
12.0
0.47
Figure 2 - SDR Plug Pinout
40.6
1.6
13 12 11 10 9 8 7 6 5 4 3 2 1
12.5
0.49
mm
[Inch]
Tolerance Unless Noted
0.0
mm
±
.1
0.00
± .10
26 25 24 23 22 21 20 19 18 17 16 15 14
Figure 3
MDR Receptacle Pinout
TS-2128-C
Sheet 2 of 3
[ ] Dimensions for
Reference only
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm High Speed Digital Data Transmission, 26 position
CN-1
Conn.
Pos.
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
1
14
13
26
Shell
1MG26-LFW0-00C-XXX
CN-2
Conn.
Pos.
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
1
14
13
26
Shell
Base Configuration
Full / Medium configuration
Cable
CC4-
Z3+
Z3+
CC4-
TWINAX 1
CC4+
Z3-
Z3-
CC4+
CC3+
Zclk+
Zclk+
CC3+
TWINAX 2
CC3-
Zclk-
Zclk-
CC3-
CC2-
Z2+
Z2+
CC2-
TWINAX 3
CC2+
Z2-
Z2-
CC2+
CC1+
Z1+
Z1+
CC1+
TWINAX 4
CC1-
Z1-
Z1-
CC1-
Ser TFG+ ZO+
ZO+
Ser TFG+
TWINAX 5
Ser TFG- ZO-
ZO-
Ser TFG-
Ser TC-
Terminated
Terminated Ser TC-
TWINAX 6
Ser TC+
100 ohm
100 ohm Ser TC+
X3+
Y3+
Y3+
X3+
TWINAX 7
X3-
Y3-
Y3-
X3-
XC+
Yclk+
Yclk+
XC+
TWINAX 8
XC-
Yclk-
Yclk-
XC-
X2+
Y2+
Y2+
X2+
TWINAX 9
X2-
Y2-
Y2-
X2-
X1+
Y1+
Y1+
X1+
TWINAX 10
X1-
Y1-
Y1-
X1-
XO+
YO+
YO+
XO+
TWINAX 11
XO-
YO-
YO-
XO-
INNER
INNER
INNER
INNER
SHIELD
SHIELD
SHIELD
SHIELD
INNER
INNER
INNER
INNER
SHIELD
SHIELD
SHIELD
SHIELD
DRAIN WIRE
INNER
INNER
INNER
INNER
SHIELD
SHIELD
SHIELD
SHIELD
INNER
INNER
INNER
INNER
SHIELD
SHIELD
SHIELD
SHIELD
BRAID SHIELD
Cable Assembly Wiring Diagram
Table 1
Ordering Information
1MG26-LFW0-00C-XXX
(RIA E1 & C1 apply)
Length:
100 = 1m
200 = 2m
500 = 5m
A00 = 10m
Reference notes 1 & 2 for cable length tolerance
Notes:
1. For a cable length of less than 2m, the length tolerance is +50mm / -0mm
2. For a cable length of 2m or more, the length tolerance is +3% / -0% of cable length
TS-2128-C
Sheet 3 of 3
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part
does not
contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-c
京公网安备 11010802033920号
EEWORLD
