Z201T336R00TB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> The resistor> Z201T336R00TB

Z201T336R00TB: DescriptionFixed Resistor, Metal Foil, 0.6W, 336ohm, 300V, 0.01% +/-Tol, -.2,.2ppm/Cel, 3011,; CategoryPassive components The resistor; File Size2MB，8 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Z201T336R00TB Overview

Fixed Resistor, Metal Foil, 0.6W, 336ohm, 300V, 0.01% +/-Tol, -.2,.2ppm/Cel, 3011,

Z201T336R00TB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	861197771
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Rectangular
Lead diameter	0.644 mm
Lead length	25.4 mm
lead spacing	3.81 mm
Number of terminals	2
Maximum operating temperature	175 °C
Minimum operating temperature	-55 °C
Package height	8.28 mm
Package length	7.62 mm
Package shape	RECTANGULAR PACKAGE
Package form	Radial
Package width	2.67 mm
method of packing	Bulk
Rated power dissipation(P)	0.6 W
resistance	336 Ω
Resistor type	FIXED RESISTOR
series	Z201
size code	3011
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Tolerance	0.01%
Operating Voltage	300 V

Preview

Download Datasheet

View All

Z Series (Z-Foil)

Vishay Foil Resistors

Ultra High Precision Z-Foil Though-Hole Resistor

with TCR of ± 0.05 ppm/°C, Tolerance of ± 0.005 % (50 ppm),

Load Life Stability of ± 0.005 %

FEATURES



Temperature coefficient of resistance (TCR):

- ± 0.05 ppm/°C nominal (0 °C to + 60 °C)

- ± 0.2 ppm/°C nominal (- 55 °C to + 125 °C,

+ 25 °C ref.) (see table 1)



Rated power: to 1 W at + 125 °C (see table 2)



Resistance tolerance: to ± 0.005 % (50 ppm)



Load life stability: ± 0.005 % at 70 °C, 2000 h or ±0.015%

at 70°C,10000 h (see table 4)



Resistance range: 5

to

600 k



Vishay Foil Resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)



Total accumulated change in resistance over life (EOL)

or Total Error Budget < 0.1 % (or better with PMO)**



Electrostatic discharge up to 25 000 V



Non-inductive, non-capacitive design



Rise time: 1 ns effectively no ringing



Current noise:

≤

0.010 µV

RMS

/V of applied voltage (< - 40

dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Low inductance: < 0.08 µH typical



Thermal stabilization time < 1 s (to reach within 10 ppm of

steady state value)



Pattern design minimizing hot spots



Terminal finish: lead (Pb)-free or tin/lead alloy



Matched sets are available per request



(TCR tracking: to 0.5 ppm/°C)



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

INTRODUCTION

The Bulk Metal

Foil resistor is based on a special

thermo-metalic stress concept wherein a proprietary bulk

metal cold rolled foil is cemented to a ceramic substrate. It is

then photoetched into a resistive pattern. Then it is laser

adjusted to any desired value and tolerance. Because the

metals used are not drawn, wound or mistreated in any way

during manufacturing process, the Bulk Metal Foil resistor

maintains all its design, physical and electrical

characteristics while winding of wire or sputtering does not.

Z foil resistors achieve maximum stability and near-zero

TCR. These performance characteristics are built-in for

every unit, and do not rely on screening or other artificial

means for uniform performance.

The stability of a resistor depends primarily on its history of

exposures to temperature. Stability is affected by:

1. Reversible changes in the ambient temperature and heat

from adjacent components (defined by the Temperature

Coefficient of Resistance, or TCR)

2. Short-term steady-state self-heating (defined by Power

TCR or PCR)

3. Irreversible destabilizing shock of suddenly-applied

power

4. Long-term exposure to applied power (load-life stability)

5. Repetitive stresses from being switched on and off

In very high-precision resistors, these effects must be taken

into account to achieve high stability with changes in load

(Joule Effect) and ambient temperature.

Vishay Foil Resistors’ new Z-Foil technology provides an

order of magnitude reduction in the Bulk Metal Foil

element’s sensitivity to temperature changes - both external

and internal. This technology provides TCR of

± 0.05 ppm/°C nominal (instrument range: 0 °C to +60 °C),

± 0.2 ppm/°C nominal (military range: - 55 °C to + 125 °C,

+ 25 °C ref), and a PCR of 5 ppm at rated power.

In order to take full advantage of this TCR improvement, it is

necessary to take into account the differences in the

resistor’s response to each of the above-mentioned effects.

The Z series has been developed to successfully deal with

these factors.

TABLE 1 - NOMINAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

VALUE

100



to 600 K



to < 100



to < 80



to < 50



to < 25



to < 10



STANDARD

TOLERANCE

± 0.005 %

± 0.01 %

± 0.02 %

± 0.05 %

NOMINAL TCR AND

MAX. SPREAD

(ppm/°C)

± 0.2 ± 0.6

± 0.2 ± 0.8

± 0.2 ± 1.0

± 0.2 ± 1.3

± 0.2 ± 1.6

± 0.2 ± 2.3

* Pb containing terminations are not RoHS compliant, exemptions may apply

** See PMO page 5

Document Number: 63187

Revision: 22-Oct-13

For any questions, contact:

foil@vishaypg.com

www.vishayfoilresistors.com

Recommended Resources

Oscilloscope converter provides four channel display

Four-channel remote control switch circuit a

HT-1460 circuit

TPS2014 typical application circuit diagram

Novel factory timing circuit diagram

555 sound and light control delay energy-saving light circuit

Application of baud rate adaptive technology on DSP5402 C++ test program (repost): /*------------------------------------------------- Application of baud rate adaptive technology on DSP5402: C++ test program Vegetable farmer HotPower@126.com 2005.6.33 21:58 At the vegetable field o...; sw DSP and ARM Processors

How to load a downloaded source package into ROOTFS?: I want to add an application (such as MINI_HTTPD). How can I run it on the board?...; jhxajh Embedded System

How to avoid DC voltage entering the SCL and SDA signals of the I2C adapter and causing the adapter to burn out?: How to design a protection circuit to protect the SCL and SDA signals of the I2C adapter? Sometimes, 12V DC is accidentally injected directly into the SCL signal of the I2C adapter, causing the entire...; TSZKIN Analog electronics

#2021Practice Together#Summary: Welcome everyone to practice together: https://bbs.eeworld.com.cn/thread-1154979-1-1.htmlThe following is a summary of the practice posts:username Share Link@ tomjianchun.xu" Practice Together in 2021...; okhxyyo Talking

Questions: In uCOS II, I use uCOS to write a program for LM3S6911. All three serial ports receive or send serial port data in query mode! When I create tasks in the main function and put the three separate seria...; lixmlxm Embedded System

About the cursor control problem of SMC1602: I am new to using the SMC1602A display and I have encountered some problems that I don't know how to solve, such as cursor control. If I want it to be displayed at a specified position, how should I w...; gwl326 MCU

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components