When using EV in 2812, you can directly write EVx.ACTRx to directly control the forced high and forced low of PWM output. How should I configure it on the device using ePWM so that it can be forced hi
Looking for RF wake-up solution, 125KHz low frequency or high frequency is fine, as long as it can wake up. Wake-up distance <1.2m; antenna area is about 1.2mX1.2m; if you have a solution, please cont
MCLK represents the CPU operation and system clock. 430 executes a simple instruction in one clock cycle. Why does it take the same time to execute the same code when MCLK=REFOCLK (32768HZ) and MCLK=X
[i=s] This post was last edited by electrics on 2016-9-26 00:33 [/i] while(1) { if(((TIM2->SR&0X0001)==1)&&((TIM2->CCER & 0X0002)==0X0002)) //Falling edge trigger and judgment is reaching the maximum
Single-choice questions 1. The transmission mode in which the microprocessor only starts the peripherals without intervening in the transmission process is _________ mode. A. Interrupt B. DMA C. Query