This course is a high-quality teaching video on the principles and applications of inverters taught by Professor Li Jiusheng of Harbin Institute of Technology. The complete course has a total of 36 hours. The main circuit of the frequency converter is the power conversion part that provides voltage-regulated and frequency-modulated power to the asynchronous motor. The main circuit of the frequency converter can be roughly divided into two categories. The voltage type is a frequency converter that converts the DC of the voltage source into AC, and the filter of the DC circuit. It's a capacitor. The current type is an inverter that converts DC from a current source into AC, and its DC loop filter is an inductor. It consists of three parts: the "rectifier" that converts industrial frequency power into DC power, the "smoothing circuit" that absorbs the voltage pulsations generated in the converter and inverter, and the "inverter" that converts DC power into AC power. Transformer".
Structure: The LMS8962 board is connected to the PC, TCP protocol, no operating system. The PC program is written in VC, and all tests are normal. Function: The board sends 3 unsigned ints to the PC,
int user_start()
{int nBytes=0;int num=0;char buffer[20];int nByte=0;int fd=0;char buf[200];time_t seconds=0;time_t tim;if((fd=open("/tyCo/2",O_RDWR,0))==ERROR){printf("Error to OPEN the serial!");exi
I am programming on LPC2103, but I don't have a deep understanding of the UART port of this chip. Now I want to write a program that simply uses interrupts to receive information sent by the computer.
I used a 52 experimental board, the software is progisp, which was borrowed by a classmate for half a year. I found a HEX file, clicked to load FLASH, turned on the power, and then clicked automatic.
I contribute a DSP2407A with AD conversion and serial port sending and receiving functions program and schematic diagram. DSP2407A with AD conversion and serial port sending and receiving functions pr
Wuhan Shenzhou Weiye Electronics Co., Ltd. is recruiting embedded software design engineers > Requirements > 1. Bachelor degree or above, graduated from computer, electronic information and other rela
Microcontroller MCU
京公网安备 11010802033920号
