Because the battery management chip used before was MAX1924V, Maxim Semiconductor does not provide free chips. So I modified the design and re-selected MAX17005B as the battery management chip, modifi
[size=4] I am a new MCU beginner. I have just started to learn STM32. I have collected a lot of relevant information on the Internet, but I found that these materials are very scattered and have not b
I am drawing an expansion board for BeagleBone. BeagleBone has its own LCD controller that outputs level signals. Please recommend a 4-inch TFT screen with a resolution of about 800*480. It is best if
We are required to design an AC parameter tester based on a single-chip microcomputer. Although I have some ideas, they are still very vague. I would like to ask you to help explain the principle. The
Hello everyone. I used msp430f149's SPI to control nrf24l01 and achieved normal communication. Recently, I used msp430f5438 to transplant the program, but it still cannot communicate. I looked at the
Please give me some advice, I hope I didn't destroy a bunch of chips, ahhhhh...
I came early in the morning and fiddled with the chips. My hand slipped and all the chips fell to the ground.
A bunch of