sigma

Multi-target ranging sensor expansion board based on VL53L3CX, suitable for STM32 Nucleo

X-NUCLEO-53L3A2

Overview

The X-NUCLEO-53L3A2 is an expansion board for the NUCLEO-F401RE development board. It provides a complete evaluation kit allowing anyone to learn, evaluate, and develop their applications using the VL53L3CX, ranging sensor with multi target detection..

The X-NUCLEO-53L3A2 expansion board is delivered with a cover glass holder in which three different spacers of 0.25, 0.5, and 1 mm height can be fitted below the cover glass to simulate various air gaps.
Two VL53L3CX breakout boards can be connected using two 10-pin connectors.
The X-NUCLEO-53L3A2 expansion board is compatible with the STM32 nucleo board family, and with the Arduino UNO R3 connector layout.
Several ST expansion boards can be superposed through the Arduino connectors which allows, for example, the development of VL53L3CX applications with Bluetooth or Wi-Fi interfaces.

Main features

VL53L3CX Time-of-Flight (ToF) ranging sensor with multi target detection
Accurate absolute ranging distance, independent of the reflectance of the target
0.25, 0.5, and 1 mm spacers to simulate air gaps
Two different cover windows
Two VL53L3CX breakout boards
Compatible with STM32 Nucleo board family
Equipped with Arduino™ UNO R3 connector
RoHS compliant
Full system software (SW) supplied, including code examples and graphical user interface. All this can be downloaded from the VL53L3CX product page on st.com.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2025-06-20 09:47:54

CAN to WiFi adapter schematic diagram (paid answer)
FPGA uses XC6SLX4 chip, CAN controller uses ADM3053, to realize the function of CAN to WiFi, the specific requirements are as follows:
The picture on the Secure Digital/Multimedia Card (SD/MMC) has a question mark?
[img]C:\Documents and Settings\Administrator\Desktop\sd.bmp[/img] Why is there a question mark?
Share all information (rotating LED three-dimensional flat integrated board production) 4 modes infrared remote control switching
All production materials sharing: Wireless power supply is used to power the rotating motherboard ! It is quieter when rotating ! Since several versions have been produced , the balance problem has be
How to distribute .CMD files
Taking the TMS320F2812 chip as an example, combined with specific simulation debugging examples, this paper explains how to allocate .cmd files quickly and accurately. 1. Configuration of storage spac
About DS1302 welding circuit
Problem symptoms: I would like to ask experts who have used ds1302 clocks. The clock can be realized on the development board, but after soldering it on the circuit board, it can't work and displays t
When using IP to generate PLL clock, ISE warning 1127 appears. How to eliminate it?
[i=s]This post was last edited by DevilMayCry on 2017-11-5 23:51[/i] As the title says, when using IP to generate PLL clock in ISE14.7, there will always be two warnings as follows: [color=#ffa500]HDL

Datasheet More

Circuits More